Glasspack vs single chamber muffler
#1
CF Veteran
Thread Starter
Glasspack vs single chamber muffler
My jeep is currently straight piped with the exhaust dumping underneath I want to have it ran back to the factory location. I can't decide if I want a single chamber muffler or a short Glasspack. I like the sound of the single chamber better but I believe a Glasspack will flow better any input on this?
#3
Junior Member
Join Date: Oct 2015
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 Liter
My jeep is currently straight piped with the exhaust dumping underneath I want to have it ran back to the factory location. I can't decide if I want a single chamber muffler or a short Glasspack. I like the sound of the single chamber better but I believe a Glasspack will flow better any input on this?
#4
CF Veteran
Thread Starter
#5
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
You won't get lost. That's just where these types of questions go. That's why you don't see questions about exhaust much as their own thread. They usually go in that sticky thread. The ask a question thread is 10 times bigger and everyone's questions usually get a response.
#7
CF Veteran
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
Ill chime in just because this thread is already at the top of the feed, I believe that there is a really minimal difference in flow between those options. I have had 3 or 4 exhaust setups now in the muffler/ tailpipe area and I think just go with what you think sounds the best. The power gains will be microscopic at best, and I think the exhaust noises are what make a vehicle feel faster or more powerful. So I would definetely say go for the best sounding option to you
Go with what you like the sound of. The difference in flow will not be noticeable, in fact the lack of back pressure can actually hurt your performance.
Trending Topics
#8
Seasoned Member
I finally installed mine today in my '87. I had to weld the flange on a straight piece of pipe that bolts to where the CC would go (it's a Renix model thing), then used a Walker 17197 muffler to a Dynomax tailpipe.
I have a Borla header with 1.5" collectors, a 2" crossover pipe, then the straight pipe, muffler and tail pipe are all 2.5". The muffler is longer than what is considered a standard replacement, and is center/offset on the ends. It has a lower tone, and not as sharp as when the exhaust just dumped out the cross-over. Based on the water vapor pulses coming out the tailpipe, it appears savaging remains unchanged.
I have a Borla header with 1.5" collectors, a 2" crossover pipe, then the straight pipe, muffler and tail pipe are all 2.5". The muffler is longer than what is considered a standard replacement, and is center/offset on the ends. It has a lower tone, and not as sharp as when the exhaust just dumped out the cross-over. Based on the water vapor pulses coming out the tailpipe, it appears savaging remains unchanged.
#9
Seasoned Member
Join Date: Nov 2015
Location: North Louisiana
Posts: 373
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0 HO
X2,
Who's single chamber are you considering.
One VS the other depends on the muffler.
If it's just free flow baffling like a Flowmaster Super 10 then there shouldn't be much difference at all.
Also if you don't have anything more than an air filter that allows more flow, such as head work and/or a performance camshaft,
Then you really don't need max exhaust flow.
Like LACK said, the lack of back pressure can hurt performance.
Who's single chamber are you considering.
One VS the other depends on the muffler.
If it's just free flow baffling like a Flowmaster Super 10 then there shouldn't be much difference at all.
Also if you don't have anything more than an air filter that allows more flow, such as head work and/or a performance camshaft,
Then you really don't need max exhaust flow.
Like LACK said, the lack of back pressure can hurt performance.
Last edited by Constantine; 01-08-2017 at 07:27 AM.
#10
CF Veteran
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
I have a single chamber flowmaster on mine. It honestly is a little too loud for my tastes but the previous owner had it installed, drones quite a bit at low RPM's. I may change it out at some point for something a little quieter.
#11
CF Veteran
Thread Starter
I was looking at this single chamber muffler http://www.ebay.com/itm/201363926228?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AITvs a short 10' or 12" glasspack.
#12
CF Veteran
Join Date: Jun 2016
Location: CO
Posts: 1,011
Likes: 0
Received 20 Likes
on
18 Posts
Year: 99
Model: Cherokee (XJ)
Engine: 4.0
option: save your money and just have the exhaust routed out to the stock location and keep it straight piped. I ran mine this way and it sounds amazing, while not the drone you probably have in the cab right now. any exhaust you put on will be extremely quiet in comparison. as far as lack of back pressure i cant say i notice any performance loss but it feels like she breathes better on the highway.
#13
CF Veteran
Thread Starter
option: save your money and just have the exhaust routed out to the stock location and keep it straight piped. I ran mine this way and it sounds amazing, while not the drone you probably have in the cab right now. any exhaust you put on will be extremely quiet in comparison. as far as lack of back pressure i cant say i notice any performance loss but it feels like she breathes better on the highway.
#14
https://www.summitracing.com/parts/WLK-24239
I just ordered two of those.
And one of these-
https://www.summitracing.com/parts/JEX-SU3-3
Will be here tomorrow.
I just ordered two of those.
And one of these-
https://www.summitracing.com/parts/JEX-SU3-3
Will be here tomorrow.
#15
CF Veteran
Thread Starter
I don't want a glasspack 25" long If they have one half that size for cheaper then that would be a deal.