Ok, so im doing my build in an ***-backward order... long story short, i need to go ahead and get my steering linkages cut to length, but my 44 is in peices, so im unale t take measurements. Thats where yu guys come in! if i can get someone to measure the legnth of thier tie rod and drag link, i would be totally indebted to you!

 

Need to know what d44 you are running, which ends are you gong to use? WHich HI steer arms? YOU just cant just pull this info out of the air

 

3/4 ton ford hp44 and full crossover hi steer from blufab

 

TRE's or heims?

 

tres for now

 

Sorry to say, but we could all measure and come up with something slightly different. I would be patient and wait till your axle is together and then mock it up. Just my .02

 

I've got a 78 f250 hp44 with ballistic hi steer arms. Ill measure mine tonight. It should be damn close if you have a older f250 hp44

 

tie rod = 50"
drag link = 26"

 

sweeeet, Thanx Royal!

 

no problem

 

btw... is that like tre to tre length? or end of DOM to end of DOM?

 

thats tube length. your fine adjust will be in your tre's