A Few Random Swap Questions...
Thread Starter
CF Veteran
Joined: Apr 2011
Posts: 1,146
Likes: 0
From: Clayton, NC
Year: 1988
Model: Cherokee
Engine: 4.6L I6 Stroker with port matched +99 intake and 62mm TB
A Few Random Swap Questions...
Ok, I have few questions that I hope some of the tech gurus here can answer to aid me in my project...
First off, will the dust shields from an AW4 auto work for an AX15 manual?
Next, can I easily eliminate the AW4 TCU wire harness since I'm going to an AX15? I know that you have to jumps some pins (fake out the ECU for the NSS), but could I jump the needed wires and eliminate the rest? Don't really want to run the TCU under the dash if I can get around it.
Finally, will my clutch master cylinder that served for the AX4 work with the AX15? I figure it will but I'd like someone who knows to verify this.
First off, will the dust shields from an AW4 auto work for an AX15 manual?
Next, can I easily eliminate the AW4 TCU wire harness since I'm going to an AX15? I know that you have to jumps some pins (fake out the ECU for the NSS), but could I jump the needed wires and eliminate the rest? Don't really want to run the TCU under the dash if I can get around it.
Finally, will my clutch master cylinder that served for the AX4 work with the AX15? I figure it will but I'd like someone who knows to verify this.
Thread
Thread Starter
Forum
Replies
Last Post
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Sep 26, 2015 07:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)