Changing engines
07-24-2013, 12:04 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2013
Location: Va
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 l6
Changing engines
Hey Everyone i was wondering if there would be any complications taking an engine out of a 96 jeep cherokee and putting it in a 2000 jeep cherokee body?
09-17-2013, 05:04 PM
#4
Junior Member
Thread Starter
Join Date: Jul 2013
Location: Va
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 l6
Alright I have decided to take a motor out of 1993 jeep cherokee and put it in a 2000 jeep cherokee. I was wondering if there would be any mounting differences and wiring differences?
09-18-2013, 01:57 AM
#5
Junior Member
I have a 2000 engine in my 93, it will bolt right up, the problem I had was I didn't swap the flywheel and they are different because of the crank pos sensor. I also used the p/s pump from the 2000 because I liked the belt tensioner on it better than the 93. I kept the 2000 intake manifold but used all the electronics from the 93 including injectors. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
frantic29
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
09-26-2015 04:30 PM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)