Jeep Cherokee Forum

Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

exhaust problem after lift

   
Old Sep 4, 2013 | 07:56 PM
Share
  #1  
mwilliams0311's Avatar
mwilliams0311
Thread Starter
Member
 
Joined: Aug 2013
Posts: 236
Likes: 1
From: Stockton CA
Year: 1990
Model: Cherokee
Engine: I6
Default exhaust problem after lift
Hey guys.. so after my lift my exhaust won't clear at all and startin to scrape bad.. can I just hack it off at the last retainer and angke it down.?....or??

exhaust problem after lift-forumrunner_20130904_175454.jpg



exhaust problem after lift-forumrunner_20130904_175522.jpg
Reply
0
Old Sep 4, 2013 | 08:08 PM
Share
  #2  
93XJLI's Avatar
93XJLI
CF Veteran
 
Joined: Jan 2008
Posts: 3,671
Likes: 11
From: LI, NY
Year: 1998
Model: Cherokee
Engine: 4.0, bolt ons for days...
Default
bend it. if you chop it off before the leaf spring your bushings will look like this:

Reply
0
Old Sep 4, 2013 | 08:17 PM
Share
  #3  
mwilliams0311's Avatar
mwilliams0311
Thread Starter
Member
 
Joined: Aug 2013
Posts: 236
Likes: 1
From: Stockton CA
Year: 1990
Model: Cherokee
Engine: I6
Default
Originally Posted by 93XJLI
bend it. if you chop it off before the leaf spring your bushings will look like this:
Haha good call... fir some reason I didn't think of bending it.. thank you
Reply
0
Old Sep 4, 2013 | 09:43 PM
Share
  #4  
Tom95YJ's Avatar
Tom95YJ
CF Veteran
 
Joined: Nov 2011
Posts: 3,603
Likes: 3
From: SLC, Utah
Year: 1999
Model: Cherokee
Engine: 4.0L
Default
Hit up Mudfrog in the vendors section a catback from him is like 150 shipped for flowmastwer or magnaflow i have plenty of clearance with mine
Reply
0
Old Sep 4, 2013 | 10:06 PM
Share
  #5  
mwilliams0311's Avatar
mwilliams0311
Thread Starter
Member
 
Joined: Aug 2013
Posts: 236
Likes: 1
From: Stockton CA
Year: 1990
Model: Cherokee
Engine: I6
Default
Originally Posted by Tom95YJ
Hit up Mudfrog in the vendors section a catback from him is like 150 shipped for flowmastwer or magnaflow i have plenty of clearance with mine
Oh nice.. did you have the same problem? I don't see how anyones could fit after this lift
Reply
0
Old Sep 4, 2013 | 10:11 PM
Share
  #6  
mwilliams0311's Avatar
mwilliams0311
Thread Starter
Member
 
Joined: Aug 2013
Posts: 236
Likes: 1
From: Stockton CA
Year: 1990
Model: Cherokee
Engine: I6
Default
Originally Posted by Tom95YJ
Hit up Mudfrog in the vendors section a catback from him is like 150 shipped for flowmastwer or magnaflow i have plenty of clearance with mine
Nice. I just read some threads on it. Thanks man
Reply
0
Old Sep 5, 2013 | 04:29 AM
Share
  #7  
andrewmp6's Avatar
andrewmp6
CF Veteran
 
Joined: Jun 2011
Posts: 8,014
Likes: 17
From: Louisville,KY
Model: Cherokee
Default
You could do a turn down right after the muffler.
Reply
0

Trending Topics

Old Sep 5, 2013 | 03:36 PM
Share
  #8  
KG8893's Avatar
KG8893
Seasoned Member
 
Joined: Dec 2012
Posts: 451
Likes: 0
From: Middletown, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Default
Originally Posted by andrewmp6
You could do a turn down right after the muffler.
Mine just dumps out the cat... Check your emissions laws though, some states require the exhaust exits the dimensions of the vehicle.
Reply
0
Old Sep 5, 2013 | 03:42 PM
Share
  #9  
mwilliams0311's Avatar
mwilliams0311
Thread Starter
Member
 
Joined: Aug 2013
Posts: 236
Likes: 1
From: Stockton CA
Year: 1990
Model: Cherokee
Engine: I6
Default
Originally Posted by KG8893

Mine just dumps out the cat... Check your emissions laws though, some states require the exhaust exits the dimensions of the vehicle.
Yeah I'm guessing California has that law since they have everything else under the sun
Reply
0
Old Sep 5, 2013 | 04:01 PM
Share
  #10  
sthon's Avatar
sthon
CF Veteran
 
Joined: Mar 2011
Posts: 2,570
Likes: 4
From: California
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Default
I have a downturn right off the muffler, no issues with heat or **** melting...
Reply
0
Old Sep 5, 2013 | 04:06 PM
Share
  #11  
Lowrange2's Avatar
Lowrange2
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default
I have mine cut off right behind the rear most hanger that you have pictured. It ends right beside the gas tank so I added a turndown and angled it away from the gas tank and bushings.
Reply
0
Old Sep 5, 2013 | 04:11 PM
Share
  #12  
mwilliams0311's Avatar
mwilliams0311
Thread Starter
Member
 
Joined: Aug 2013
Posts: 236
Likes: 1
From: Stockton CA
Year: 1990
Model: Cherokee
Engine: I6
Default
Originally Posted by Lowrange2
I have mine cut off right behind the rear most hanger that you have pictured. It ends right beside the gas tank so I added a turndown and angled it away from the gas tank and bushings.
Ok that was my plan. You just turn it down towards the ground or out toward the leafs
Reply
0
Old Sep 5, 2013 | 04:13 PM
Share
  #13  
sthon's Avatar
sthon
CF Veteran
 
Joined: Mar 2011
Posts: 2,570
Likes: 4
From: California
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Default
Originally Posted by mwilliams0311
Ok that was my plan. You just turn it down towards the ground or out toward the leafs
Ground. Waiting on a pic to upload to gplus to post.
Reply
0
Old Sep 6, 2013 | 07:41 AM
Share
  #14  
mwilliams0311's Avatar
mwilliams0311
Thread Starter
Member
 
Joined: Aug 2013
Posts: 236
Likes: 1
From: Stockton CA
Year: 1990
Model: Cherokee
Engine: I6
Default
Originally Posted by sthon

Ground. Waiting on a pic to upload to gplus to post.
Yeah If you could post a couple good pics I would appreciate it. I heard it rubbin for the first time this morning so I gotta get it done soon.
Reply
0
Old Sep 6, 2013 | 09:27 AM
Share
  #15  
sthon's Avatar
sthon
CF Veteran
 
Joined: Mar 2011
Posts: 2,570
Likes: 4
From: California
Year: 1992
Model: Cherokee
Engine: 4.0 HO
Default
Originally Posted by mwilliams0311
Yeah If you could post a couple good pics I would appreciate it. I heard it rubbin for the first time this morning so I gotta get it done soon.
exhaust problem after lift-w1pfqfg.jpg
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 09:50 AM.