Dome override switch
Hey everybody I have a 96 Jeep Cherokee non power windows and when I open my door that dldoor jamb button is dropping my idol and stalling my car only in the morning when it's cold if I push my finger in on that button everything is fine I disconnected the door jamb button so that I can start it and have the door open without it stalling the car I've replaced the door jamb button and I've checked the wiring connected to it I've checked grounds in my engine compartment I don't know how to fix this if I pull the boot off of the door opening there's only two wires there and none are crimped or broken or anything like that what else can I look for I've been dealing with this problem since winter thanks for your help in advance.
This was an issue that drove me nuts too. Please see the end of this thread, or the attached pictures. First picture is PDC near passenger side right kick panel - you've got to take the cover all the way off to get to the connection, which should be the same on 1997-2001, not sure about previous models. This yellow 20ga wire is the ground from dome lamp to all 4 door switches - splice a switch into this to decide whether to use the door switches or not. Enjoy!
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
Mar 10, 2021 05:52 PM
Freda L. Worley Harris
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
Feb 15, 2020 04:37 PM
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Oct 3, 2015 05:46 PM
Jeremy Millner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Oct 2, 2015 02:21 PM
Snajo
Other Vehicles. Other Jeep models & cars and trucks of other makes
0
Sep 26, 2015 11:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




