Well after about 5 months of looking in local junkyards i finally found a pair of unharmed rear disc backing plates off of a zj dana 35. Problem is its just the plates and i hammered the studs out as well. I'm trying to find all the hardware needed as far as the springs and clips needed for this at either auto zone or oreilys. Problem is ive never seen one of these complete to know what I'm needing to buy or how to put it back together. From looking at pictures all the internal spring hardware seem to really just be being used for the parking brake right? Can anyone help in locating the parts i need?

So far ive found this.Is this the entire kit or no?
http://www.oreillyauto.com/site/c/de...3838&ppt=C0064

 

Ebay has kits that are new, and people selling used parts in complete kits as well.

 

I seem to only be able to find the new kits buy currie and others on there

 

https://www.cherokeeforum.com/f51/re...-8-25-a-57807/ and yes the springs are just for the parking brake.

 

Thanks never found that one through google search and didnt even think to look in the tech secion Looks like that kit i posted is all i really need. to put it back together then. It doesnt looks as involved as the factory drum setup either.

 

If you swap to disks will this stop the axles form 'walking out' if they brake?

 

Yes another reason im doing it. But i need extra stopping power for my 35s

 

It will, but it will only hold to get off of the trail not to drive on.

 

Have you tried the booster swap?

 

Mines a 2000 already has the larger one. Only upgrades for me is a rear disc swap and wj front caliper/disc upgrade. Not going to 16" wheels so wont be doing the wj upgrade.

 

2000 should have looked.

 

Anyone know where i can find the parts that are just above the upper spring in this picture? I have them on one backign plate but not the other.