Sorry guys wright uo is gonna be alittle delayed item is backorderd ill let ya know when it shows up

 

I'd like to have the 2nd battery so i can run my future winch, and all my lights and accesories off their own battery. Alwas nice to have emergency power.

 

this is the same reason i am goingwith the spectre style. simple because i wanna run dual batterys. I am going to have all my off road lights(6), winch, sub, amp,cb,led strobes,ect...

 

http://shop.trailheadoffroad.ihostne...ctid=XJCI91-01

thor also makes a kit guys. im running this setup just installed it two days ago, so far i really like it. def keeps the engine alot colder. noise isnt over powering. cant complain.

 

Its more expensive. Why?

 

my intake shipped yesterday so it will be here monday

 

thats awsome ill be ordering one once my taxes come in

 

2 batt. off one alternator???

 

got my intake on pretty strait forward fits well good quality, quadratec has a 20 dollar mail in rebate on them right now, it is insane sounding at wot! but no noticable diffrence otherwise

 

Here's mine and it works great and you only hear it when your at W.O.T.
You will notice less air comming out your HVAC though.
http://portagecountyjeepclub.org/for....php?f=30&t=63

 

Can you tell me how you did that. Im gonna do it to mine

 

 

I used the write up on this forum. I'm on my phone now so I don't know how to post the link. I'll try to find it when I get home.
But the short version:
1. Cut a 3" hole in the driver's side cowl low enough to clear the hood when closed but high enough to miss the brake assy (I used a dremel for this).
2. Remove the air box and cut a hole (dremel as well) below the filter line on the rear of the box. This ended up being less than perfectly round due to the limited surface area.
3. Seal the OEM opening on the front of the air box. (I used a flat piece of plastic attached with self-tapping screws and a s$&@ load of silicone RTV.
4. This should actually be first: buy a flexible intake hose 3" from, AutoZone, O'Reiley, your choice. Also pick up some large hose clamps.
5. Insert one of the rubber adapters included with the tube/hose in the hole in the cowl and one in the air box.
6. Replace air box and secure with original hardware.
7. Insert hose in each adapter and secure with hose clamp.
8. Replace filter, top, and all parts removed from box.
9. Enjoy

Ok, this wasn't a real short version but I hope it helps. If I forgot anything, someone please call me out. I don't want to give you any misinformation.

 

Here's my snorkel I built out of PVC pipe.

 

How loud is it?