I tried searching and ended up more confused. I'm getting ready to replace my coil springs with Rusty's 2" lift coil springs. I need to replace the isolators but I don't know how thick to buy and not add any more lift then the springs provide. The stock ones are gone from PO doing a BB spacer. Also, rubber or poly?
Thanks in advance.

 

Give me 10 minutes here and I will gladly get you the part number.

 

I just swapped out the springs on my 1990 w/ 235k miles on it. My isolators were in great shape, simple part w/ no noticeable wear. That being said, I'd suggest you go to the junk yard for another pair. They are the same isolator from 84-01, should be easy to find.

 

PN 52000229
I prefer rubber for this application. Standard height is 5/8".

 

Here you go from one of our own vendors as well, Morris 4x4. If you call (Before 5pm eastern), ask for either Jessie, John or Hugo and tell them you are with Cherokeeforum for a small discount. Or you can PM them here for the discount code.

 

Awesome everyone!!! Thanks!!