You would not happen to know how to figure out the firing sequence for the viper coil? So I know which plugs to hook up where? When it comes to electrical stuff I am retarded

 

This is from the link.

With the connector facing the fire wall, the top coil is cyl 3 and 4, then 2 and 5 then 1 and 6.

 

When you use this coil pack, is there any wiring changes needed on the factory wiring?

I'm going to be doing this on my '99 WJ when I swap on the 7120 head.

 

It don't seem to need any changed from looking at the link. I don't know if you have a coil rail or a distributor but it's eh same connector as what's on the coil rail so it should just plug right in

 

Thanks a ton guys I finally got around to installing this it's amazing just for ****s and grins after I pulled a spark plug and put it back in just because it's so much easier now the install was so easy a monkey could do it and as for the bracket you don't have to do nothing fancy like ordinance did I just took a 4" x10" piece of sheet steel and traced the coil pack on it and drilled holes then pulled the coolant bottle out and there are 2 random bolts on a flange under it I drilled holes for them in the sheet steel and just put the whole thing there works fine for me I'll post a picture tomorrow

 

[ Thanks a ton guys I finally got around to installing this it's amazing just for ****s and grins after I pulled a spark plug and put it back in just because it's so much easier now the install was so easy a monkey could do it and as for the bracket you don't have to do nothing fancy like ordinance did I just took a 4" x10" piece of sheet steel and traced the coil pack on it and drilled holes then pulled the coolant bottle out and there are 2 random bolts on a flange under it I drilled holes for them in the sheet steel and just put the whole thing there works fine for me I'll post a picture tomorrow