Carnage durring BB install
Thread Starter
Senior Member
Joined: Jul 2011
Posts: 671
Likes: 0
From: Chuluota
Year: 2001
Model: Cherokee
Engine: 4.0
Rear shackle bolts were only slightly seized in sleeves, and rear shock bolts broke as expected. Just started on front and already broke the shock bolts and snapped my sway bar :-(
Being from the south , northern vehicles suck. So not used to this...
Being from the south , northern vehicles suck. So not used to this...
Junior Member
Joined: Jun 2010
Posts: 55
Likes: 0
From: BrockVegas, ON
Year: 2000
Model: Cherokee(XJ)
Engine: 4.0
So now you just need to cut off the cup and weld on some threaded rod, pick up a couple of rod ends that match, customize the rear sway bar brackets (you did remove the rear sway bar - right?) and you will have home brew discos for about 40 bucks parts, bolts etc.
This is a mock up picture - I run tighter with the lynch pin during the summer and 1/2" bolts torqued down winter.
It's noisy and rattles a bit, but you get used to it.
This is a mock up picture - I run tighter with the lynch pin during the summer and 1/2" bolts torqued down winter.
It's noisy and rattles a bit, but you get used to it.
Thread Starter
Senior Member
Joined: Jul 2011
Posts: 671
Likes: 0
From: Chuluota
Year: 2001
Model: Cherokee
Engine: 4.0
Sweet man, thanks. I was just b!tching before, I took a deep a breath and had a buddy come help we knocked out the lift, just need new shock bolts and to make these sways. Good pic
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
98JGC826
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 3, 2016 08:10 PM
frado2jr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Sep 15, 2015 10:20 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 10, 2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



