camber problems
Thread Starter
Member
Joined: Jul 2009
Posts: 105
Likes: 0
From: clarksville,Tn
Year: 1994
Model: Cherokee
Engine: H.O. 4.0
camber problems
ok heres the deal il ceting over a degree of camber on both sides ive replaced everything from the hubs to the whole axle housing. i dont wanna drop 400 dollars on some adjustable ball joints being regular balljoints came out of the axle. anyone have any tricks or tips to help me out ive been dealing with this for about 4 months now. and its caused more issues and im starting to get really frustrated 
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Member
Joined: Sep 2012
Posts: 246
Likes: 0
From: Deep in the woods in SouthCentral Pennsylvania
Year: 1996
Model: Cherokee
Engine: 2.5
Make SURE of your toe first before buying those. There are several VERY GOOD writeups here on doing a basic TOE-IN alignment. My 96XJ I thought needed camber adjustment also until I did some measuring and found the difference between the front of the front tires and the rear of the front tires was almost 2 inches. It was an illusion of being off camber.
So first,,, check the toe.
So first,,, check the toe.
Thread
Thread Starter
Forum
Replies
Last Post
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
Oct 18, 2022 04:11 PM
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
Mar 17, 2022 02:15 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
Oct 4, 2015 10:52 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 3, 2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
