Bumpsteer help needed with IRO OTK
#1
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Minneapolis
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Bumpsteer help needed with IRO OTK
99xj
3" lift
IRO OTK Kit
IRO Double Shear track bar
I put this kit in and I'm getting pretty bad Bumpsteer. At the top drivers side my t bar and drag link are the same distance to the ground. At the axel end, the drag link is 1/2" lower than the track bar mount. Does anyone run this combo and have an issue? Does anyone make a .5 drop pitman? Thanks for the help!
3" lift
IRO OTK Kit
IRO Double Shear track bar
I put this kit in and I'm getting pretty bad Bumpsteer. At the top drivers side my t bar and drag link are the same distance to the ground. At the axel end, the drag link is 1/2" lower than the track bar mount. Does anyone run this combo and have an issue? Does anyone make a .5 drop pitman? Thanks for the help!
#3
Junior Member
Thread Starter
Join Date: Jul 2011
Location: Minneapolis
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
1989MichJeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
19
08-24-2016 10:54 PM
BigC9164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
01-19-2016 10:37 AM
DrLeadFoot
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
01-14-2016 08:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)