bendix to power brakes problems
#1
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
bendix to power brakes problems
alright guys I am having quite an issue with my swap to get rid of the bendix system since the dealer wont take the work. used all the parts for an 89 but bought them brand new and I have not pulled all the abs crap out yet. but now I'm having issues.
already done:
new brake lines bent, fitted, flared.(no leaks)
booster, on
master cylinder, bled.
vacuum line from booster to port above egr, attached.
lines properly ran from PV
issues:
1-no matter how much I bleed the system. still no firm brake pedal.
2-once the motor starts, the brake pedal goes limp.
Any input would be greatly appreciated. Thank you.
already done:
new brake lines bent, fitted, flared.(no leaks)
booster, on
master cylinder, bled.
vacuum line from booster to port above egr, attached.
lines properly ran from PV
issues:
1-no matter how much I bleed the system. still no firm brake pedal.
2-once the motor starts, the brake pedal goes limp.
Any input would be greatly appreciated. Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
Jose Calderon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
17
09-17-2015 08:57 PM
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
08-30-2015 03:17 PM
britishcolumbia
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-28-2015 04:08 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)