CF Veteran
Do you mean when slowing down, at 45mph you get wobble? Or from 45mph on down you get wobble? If its just at 45 I'd say its either alignment, tire balance or a suspension component.
If its all the way down I'd say its brake related possibly warped rotors.
If its all the way down I'd say its brake related possibly warped rotors.
Moderator of Jeeps
Quote:
I called them once. Rusty was polite to me, but he wasn't so nice that I would spend more money to buy his parts instead of someone else's.Originally Posted by bhennessee1
Same but I've also heard their customer service is ****ty
Quote:
x2Originally Posted by BNJeepsta
Then the hole wasn't drilled in the right spot. Move back to the stock location and use an adjustable track bar. Iro double shear is the best bang for your buck
CF Veteran
Quote:
Hahaha on a 2 wd 4 banger.Originally Posted by my89xj
Hello just got my 12" lift with 2" of body lift and 40"tires can I still run my Dana 35 with 4.10s?
CF Veteran
Quote:
If its all the way down I'd say its brake related possibly warped rotors.
Its only at 45 and the brake rotors were fine when i used a dial indicator... All the brake stuff is new and i have new tires that were just mounted and balanced a week ago. Also alignment has changed since about a month agoOriginally Posted by DieselD
Do you mean when slowing down, at 45mph you get wobble? Or from 45mph on down you get wobble? If its just at 45 I'd say its either alignment, tire balance or a suspension component.If its all the way down I'd say its brake related possibly warped rotors.
CF Veteran
Quote:
Lowers and Uppers?Originally Posted by lowrange2
CA bushings...
CF Veteran
Quote:
Alright then... i might get new lowers then... riding on 3 inch lift... New LCA's are going to be longer so wouldn't that change the alignment i have?Originally Posted by lowrange2
Might as well.
CF Veteran
Quote:
Oh i know i just figured i might as well upgrade...Originally Posted by lowrange2
Slightly. I didn't mean new arms. Just the bushings.
CF Veteran
Quote:
not only did i brace my drop brackets, but i didn't trust the two frame screws so i welded the entire thing to the frame. gonna be a crappy day torching them off but i'll worry about that then.Originally Posted by I Leak Oil
As long as they are braced. Unlike that one guy who showed the pic where they were just bolted on top of the co bracket. Havent seen him in forever, maybe they are the reason
CF Veteran
Quote:
Yeah ill just replace themOriginally Posted by lowrange2
Big hammer and lots of patience.