Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Wheels and Tires
- Jeep Grand Cherokee ZJ 1993 to 1998 Tires General Information and Specs
Important information to help you understand your Jeep Grand Cherokee.
Browse all: Wheels and Tires
All Lift & Tire questions go here!!!
CF Veteran
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
Member
Join Date: Sep 2014
Location: Cleveland, OH
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Before I click "buy", can someone sanity check this setup?
I already have a 3" Zone Suspension lift:
Wheel, Cragar V-5, Steel, Black, 15 in. x 8 in., 5 x 4.5 in. Bolt Circle, 3.75 in. Backspace
Tire, Discoverer A/T3, LT 31 in. x 10.50 in.-15, Radial
Good?
I already have a 3" Zone Suspension lift:
Wheel, Cragar V-5, Steel, Black, 15 in. x 8 in., 5 x 4.5 in. Bolt Circle, 3.75 in. Backspace
Tire, Discoverer A/T3, LT 31 in. x 10.50 in.-15, Radial
Good?
Last edited by noisufnoc; 11-17-2016 at 02:36 PM.
CF Veteran
Yeah it's tough! I think I'd personally go with the 3.5" leafs, but that's just me. I'd just rather install longer shackles than break down the front to install coil spacers.
Click buy!
Click buy!
CF Veteran
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
Thanks for helping me make up my mind. 3.5 leafs are slightly cheaper too.
Should be ready to roll. With the 31's and 3" lift you should have plenty of room to flex on the trail.
CF Veteran
Member
Join Date: Oct 2016
Location: Sarasota, FL
Posts: 127
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0
Lift and Tire/Wheel combo feedback
Hey everyone,
I have a 2001 XJ and I'm about to the pull the trigger on this 3-inch Rough Country suspension lift:http://www.roughcountry.com/jeep-sus...-kit-630x.html
And these tires/wheels in 31x10.50:http://www.quadratec.com/products/92609_281X_A_PG.htm
Could someone tell me if this would work - clearance, backspacing (kinda unclear on this), if I needed wheel spacers, etc.
From what I've researched, it should do the trick...
Also, does anyone know if Rough Country or Quadratec usually offer any holiday discounts or promo codes in December? I could definitely wait if that's the case.
Thanks a bunch in advance for the feedback guys,
Thanks,
-XJM
I have a 2001 XJ and I'm about to the pull the trigger on this 3-inch Rough Country suspension lift:http://www.roughcountry.com/jeep-sus...-kit-630x.html
And these tires/wheels in 31x10.50:http://www.quadratec.com/products/92609_281X_A_PG.htm
Could someone tell me if this would work - clearance, backspacing (kinda unclear on this), if I needed wheel spacers, etc.
From what I've researched, it should do the trick...
Also, does anyone know if Rough Country or Quadratec usually offer any holiday discounts or promo codes in December? I could definitely wait if that's the case.
Thanks a bunch in advance for the feedback guys,
Thanks,
-XJM
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Hey everyone,
I have a 2001 XJ and I'm about to the pull the trigger on this 3-inch Rough Country suspension lift:http://www.roughcountry.com/jeep-sus...-kit-630x.html
And these tires/wheels in 31x10.50:http://www.quadratec.com/products/92609_281X_A_PG.htm
Could someone tell me if this would work - clearance, backspacing (kinda unclear on this), if I needed wheel spacers, etc.
From what I've researched, it should do the trick...
Also, does anyone know if Rough Country or Quadratec usually offer any holiday discounts or promo codes in December? I could definitely wait if that's the case.
Thanks a bunch in advance for the feedback guys,
Thanks,
-XJM
I have a 2001 XJ and I'm about to the pull the trigger on this 3-inch Rough Country suspension lift:http://www.roughcountry.com/jeep-sus...-kit-630x.html
And these tires/wheels in 31x10.50:http://www.quadratec.com/products/92609_281X_A_PG.htm
Could someone tell me if this would work - clearance, backspacing (kinda unclear on this), if I needed wheel spacers, etc.
From what I've researched, it should do the trick...
Also, does anyone know if Rough Country or Quadratec usually offer any holiday discounts or promo codes in December? I could definitely wait if that's the case.
Thanks a bunch in advance for the feedback guys,
Thanks,
-XJM
CF Veteran
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Wait a week. It's almost Black Friday/Cyber Monday
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
CF Veteran
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
CF Veteran
Nice! Can't go wrong with CavFab 3 link. Start a build thread when you get rolling with everything.
CF Veteran
Join Date: Oct 2016
Location: CA
Posts: 1,535
Likes: 0
Received 7 Likes
on
4 Posts
Year: 1994
Model: Cherokee (XJ)
https://www.cherokeeforum.com/f46/la...ountry-231042/