Aftermarket diff cover with 3" lift and JKS track bar?
#1
CF Veteran
Thread Starter
Join Date: Dec 2011
Location: Near the airport by the water
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Aftermarket diff cover with 3" lift and JKS track bar?
I have a question for those of you with a 3-3.5 inch lift with the JKS OGS126 track bar. What aftermarket differential covers are you using for your D30 that don't have any interference? The website states that vehicles with an aftermarket diff cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference, but I have heard of people running into interference with lots of different covers. I currently have a 3" OME lift with 245/75-16's and only have one hockey puck as a bump stop and am able to stuff my wheels into the fender by about 3/4 of an inch and still turn my wheel.
I wanted to buy a differential cover and the only one I can find that will fit 100% without interference is the Barnett Performance Cover http://barnettperformance.net/index....roducts_id=955.
I was looking at Solid and Riddler but wanted to see if they would fit without clearancing the differential cover.
I wanted to buy a differential cover and the only one I can find that will fit 100% without interference is the Barnett Performance Cover http://barnettperformance.net/index....roducts_id=955.
I was looking at Solid and Riddler but wanted to see if they would fit without clearancing the differential cover.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)