So here is the thing, I started to use my isolation time to fix a lot of stuff with my rig and this morning started to do some works on my AC system.
My plan is to set my vents to recirculate all the time and eliminated the defrost ducts and sealed all the doors and just kept the ones that blow air just in front of you and the passenger seat. All went well as I removed the whole dash to have the work done but now that I am putting everything back together my AC blower is not working, when I turn on the AC the compressor engages and starts to get cold as well as the expansions valve gets freezing cold however the blower just does not kick in.
I used a multimeter to check if there is any voltage on the power supply wires and it shows 12v when disconnected but as soon as i connect the cables to the blower the voltage drops to 2v.
I'm not really sure what I'm doing wrong, can anyone please advise?
​
I have already tried connecting the blower directly to the battery and it works fine.