Will a front axle out of a 99 work under my 92? Or will I need to change some stuff?

 

Should work just fine as long as the gearing is the same

 

I can always swap gears over

 

Shoud be same gears, they didn't change much over the years except on the four cylinder models.

 

4 cyl auto: 4.56:1
4 cyl manual: 4.10:1
6 cyl auto: 3.55:1
6 cyl manual: 3.07:1
TD auto: 3.55:1
TD manual: 3.07:1
Rare old towing package: 3.73:1

Unless the U bolts look original or you see a tag on the diff there's no way to be sure other than by counting pinion:wheel rotations or popping off the diff cover.

Note that when changing between auto/manual & D35/C8.25 you need to get an appropriate driveshaft as they change lengths.

 

I'm only changing the front axle not the rear if that makes a difference drive shaft wise. And if it has the 3.07's I guess il be swapping gears over

 

Whoops sorry. Only the D30 up front so you don't have to worry about that.

 

Cool. So I guess I'm swapping gears from my axle to this one.

 

No one asked. 99 is the year where it can be lp or hp. Your 92 will be a hp. If the one out of the 99 is a lp you cant swap gears.

 

Didn't know they made a low pinion that year. Il have to look into that. How would I tell?

 

It will have a low pinoin. Lol

 

:facepalm: the obvious one flew over my head... I shouldn't post and work lol

 

Lol

 

I feel so stupid

 

Uhh, 2000-2001 had lp axles, I thought? A 99 would have a hp.