8.8 swap help
#1
Seasoned Member
Thread Starter
Join Date: May 2010
Location: NW Montana
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
8.8 swap help
Well guys the 8.8 is finally going into the jeep! By the looks of it though the rear is going to need new shocks. Those of you that have done the 8.8 swap, what size shocks did you go with in the rear? I have about 3.5" of lift. Being that the old axle have under mounted shocks they are too long to be re-usable.. ? BTW I used the swap kit from ruffstuff and loved it!
#3
Seasoned Member
Thread Starter
Join Date: May 2010
Location: NW Montana
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
^ are you sure these would work on a 3-4" lift w/ the 8.8 axle? Because I have the skyjacker hydro's that came with the lift and they are too long due to the fact that the shocks mounts are now above the axle..
#5
Seasoned Member
Thread Starter
Join Date: May 2010
Location: NW Montana
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
#7
CF Veteran
Join Date: May 2010
Location: Maryville Tennessee
Posts: 1,626
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 L
Well guys the 8.8 is finally going into the jeep! By the looks of it though the rear is going to need new shocks. Those of you that have done the 8.8 swap, what size shocks did you go with in the rear? I have about 3.5" of lift. Being that the old axle have under mounted shocks they are too long to be re-usable.. ? BTW I used the swap kit from ruffstuff and loved it!
Trending Topics
#8
MJ>XJ
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
Do the 8.8 swap kits not come with new tabs for shocks? Or does that kit allow u to use the stock 8.8 spots? Never bought dans for the 8.8 yet... If it uses the stock locations or mounts call and ask dan what he says has been working... Frank can help alot too...
#9
Seasoned Member
Thread Starter
Join Date: May 2010
Location: NW Montana
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
Do the 8.8 swap kits not come with new tabs for shocks? Or does that kit allow u to use the stock 8.8 spots? Never bought dans for the 8.8 yet... If it uses the stock locations or mounts call and ask dan what he says has been working... Frank can help alot too...
#10
I can guess at it again, but you really are better off installing the axle and flexing it out and then measuring for the correct length. Without doing so it's really a crap shoot and the odds of getting the correct length aren't in your favor.
It would suck to order the shocks that might be right and then have to go through the hassle of returning them and waiting for a second set to be delivered.
Make sense?
It would suck to order the shocks that might be right and then have to go through the hassle of returning them and waiting for a second set to be delivered.
Make sense?
Thread
Thread Starter
Forum
Replies
Last Post
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-02-2015 08:04 PM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)