6" lift...lower pitman arm or not?
06-08-2012, 08:55 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Location: Macomb,MI
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
6" lift...lower pitman arm or not?
This is where I'm at. All toe, caster, camber #'s are good but it still wanders.
Is the angle between the pitman arm and drag link to much?
Should I lower pitman arm and track bar?
Is the angle between the pitman arm and drag link to much?
Should I lower pitman arm and track bar?
06-08-2012, 09:09 AM
#3
Junior Member
Thread Starter
Join Date: Sep 2011
Location: Macomb,MI
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
That would of ment relocate swaybar mounts, track bar mount, and steering stabalizer mount. Complete new track bar and sway bar links. Don't want to spend a ton of time and money at this axle since it's LP.
I was thinking if I got a 2" drop pitman arm and a new track bar mount and bar, it would get me by until I can build a HP30 for OTK.
I was thinking if I got a 2" drop pitman arm and a new track bar mount and bar, it would get me by until I can build a HP30 for OTK.
06-08-2012, 10:30 AM
#6
what you are probable experiencing is tie rod roll.
the easy way out is to drop the pitman arm and trackbar mount. the right way out is to raise the rest of the steering, or go to a crossover setup and/or highsteer.
the easy way out is to drop the pitman arm and trackbar mount. the right way out is to raise the rest of the steering, or go to a crossover setup and/or highsteer.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)