CF Veteran
Quote:
Last question, can you measure the distance between stock upper shackle bolt location and the relocation hole that is directly below the stock bolt? You can move to PM if so desired. I think this info needs to be out there though cause it is pretty important to people who are on the fence about relocation bracketsOriginally Posted by 96_xj
last post on this as we need to stay on track of brake lines, but stock shackles it was 1.5" with the Tera Flex 1.75" lift shackle I got 2.5" but if you go back down to stock shackle I would imagine about 1" lift max
Senior Member
Quote:
Right around $60.Originally Posted by Gee oh Dee
And how much did that run ya?
Honorary Moderator
okay so here are some part numbers (napa) and lengths. I spent about 2 hours at napa cross referencing and what not (i need new ones too)
front:
38182 - 21.625"
380074 - 22.25" (but it has a 90* upper fitting)
38872 - 25.25"
Rear:
380729 - 21.25"
38636 - 22.25"
front:
38182 - 21.625"
Quote:
Attributes:
Brake Hose End Type : Banjo & Female - 3/8"- 24
Brake Hose Length : 21.625"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
Attributes:
Brake Hose End Type : Banjo & Female - 3/8"- 24
Brake Hose Length : 21.625"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
380074 - 22.25" (but it has a 90* upper fitting)
Quote:
Attributes:
Brake Hose End Type : Banjo & Junction - 3/8"- 24
Brake Hose Length : 22.25"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
Attributes:
Brake Hose End Type : Banjo & Junction - 3/8"- 24
Brake Hose Length : 22.25"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
38872 - 25.25"
Quote:
Attributes:
Brake Hose End Type : Banjo & Female - 3/8"-24
Brake Hose Length : 25.25"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
Attributes:
Brake Hose End Type : Banjo & Female - 3/8"-24
Brake Hose Length : 25.25"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
Rear:
380729 - 21.25"
Quote:
Attributes:
Brake Hose End Type : Junction - (2) 3/8"-24 & Female - 3/8"-24
Brake Hose Length : 21.25"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
Attributes:
Brake Hose End Type : Junction - (2) 3/8"-24 & Female - 3/8"-24
Brake Hose Length : 21.25"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
38636 - 22.25"
Quote:
Attributes:
Brake Hose End Type : Junction - (2) 3/8"-24 & Female - 3/8"-24
Brake Hose Length : 22.25"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
Attributes:
Brake Hose End Type : Junction - (2) 3/8"-24 & Female - 3/8"-24
Brake Hose Length : 22.25"
Caution Statement : Do Not Use w/ Petroleum-Based Fluids - Designed Only For Use w/ DOT Approved Silicone Or Glycol-Based Brake Fluids
Honorary Moderator
Quote:
https://www.cherokeeforum.com/f51/rc...rackets-89893/Originally Posted by Hoooper
Last question, can you measure the distance between stock upper shackle bolt location and the relocation hole that is directly below the stock bolt? You can move to PM if so desired. I think this info needs to be out there though cause it is pretty important to people who are on the fence about relocation brackets
Thread takeover! hahaha.
glad to see it worked out for everyone!
glad to see it worked out for everyone!
