So I'm looking to do a 4 hole injector mod on my 96 cherokee 4.0L. I've found tons of information but wanted to get some fresh opinions. I've looked at the lbs/hour injection rate for a 96 OE injector (22.5 @ 49psi) when that is converted over to the standard @45 psi is is around 21.9. Most of the injectors I've found have not been close to that 21.9 number. The closest I could find would be 22.55. A lot of people say use a mid 90s dodge neon injector but the rating on those are around 19 lbs/hour. Any thoughts on injectors that would run as close to the factory 21.9 as possible? Or part numbers you have had success with would be helpful.
thanks guys.

 

Contact jhc7399 here on Cherokee Forum.