Just like title says. Getting new tires to put on my new soft8s with 3.75 BS. How much rub will i get with 32" tires or should i just do 31".?I do tow once in awhile also.

 

31's max unless you plan on, or have already trimmed. I barely stuffed 32's on my 4" lift untrimmed. Cut the fenders and now I've got plenty of room. Sometimes it's not always a great idea to get the biggest tire that'll fit. Having room to articulate is always good.

 

ive got the same lift, and rims and bs as you, i have 31's and they rub on the flares when turning

 

I have run 32's on a 3.5 in both a 10.50 and 11.50 with very minor rubbing on the 11.50's no trim.

 

well then it sounds like its time to remove those stock flares (and some sheet metal), hmmmm?

 

I have 33s with a 3 inch lift but I trimed up the front and did the whole pie cut thing in the back. They don't rub in the front but can rub a little in the back because I haven't put the lift on back there yet but that's at like full flex.

 

You can do it. Just trim and bumpstop accordingly.

 

look in to a good set of cut out flares my brothers has a set of rustys and didn't have a problem with 31's with a 2"lift

 

Yeah another thing to consider is the laws in your state. Some places require you to have flares that cover the tires and others (like florida) dont give a ****.

 

You will probably have to trim quite a bit. 3" here and cut my fenders quite a bit and still might rub. Just re-cut them the other day and haven't had time to test them.

 

I got 235-75 now getting bigger tires in a short time.(they looked too small) i want the biggest i can get. Im willing to trim and im going to make flares myself. Will they rub in the front or rear before i trim or both?

 

Are those 32's?

 

The only way to tell is to do it. You MIGHT be able to drive it on the street w/o trimming but i cant say for sure.

 

33s and NO LIFT HAHAHAHA!!!!!! Hate me

 

I wouldent say i hate you. Doesent look like you can turn very well....?