3" lift front springs
Seasoned Member
Joined: Oct 2017
Posts: 325
Likes: 15
From: NW OH
Year: 1991
Model: Cherokee (XJ)
Engine: 4.0L L6 OHV 12V
Thread Starter
Senior Member


Joined: Jan 2017
Posts: 541
Likes: 70
From: Southern MD
Model: Cherokee
I have the OME rear leafs, my final lift will be between 3- 3.5", I would rather add a small "puck" spacer to add a 1/2" than be stuck with a front to high.
I will have an aftermarket bumper, one of the import 1/8" steel ones.
Has any one ever "trimmed" a coil to slightly lower if needed?
Slack
I will have an aftermarket bumper, one of the import 1/8" steel ones.
Has any one ever "trimmed" a coil to slightly lower if needed?
Slack
Seasoned Member
Joined: Oct 2017
Posts: 325
Likes: 15
From: NW OH
Year: 1991
Model: Cherokee (XJ)
Engine: 4.0L L6 OHV 12V
I have the OME rear leafs, my final lift will be between 3- 3.5", I would rather add a small "puck" spacer to add a 1/2" than be stuck with a front to high.
I will have an aftermarket bumper, one of the import 1/8" steel ones.
Has any one ever "trimmed" a coil to slightly lower if needed?
Slack
I will have an aftermarket bumper, one of the import 1/8" steel ones.
Has any one ever "trimmed" a coil to slightly lower if needed?
Slack
User beware.
Thread Starter
Senior Member


Joined: Jan 2017
Posts: 541
Likes: 70
From: Southern MD
Model: Cherokee
Thread
Thread Starter
Forum
Replies
Last Post
ohio95xj
Modified XJ Cherokee Tech
3
Sep 11, 2015 08:59 AM
snowtoys
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Nov 7, 2010 10:04 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




