3" lift, Adjustable trac bar or Redrilled stock??
#1
Senior Member
Thread Starter
Join Date: Jul 2011
Location: Chuluota
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
3" lift, Adjustable trac bar or Redrilled stock??
I bought my XJ with 3" front coils on it, and the stock bar redrilled what looks about 1" over. My question is do most people just redill with only a 3" lift? Rough Country says to do so and Rustys says to run an aftermarket one....
#3
CF Veteran
Join Date: Jun 2009
Location: Columbus, Ohio
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
tough finding an adjustable that'll work with a 3" lift. 3/4" over on the hole should do the trick.
#4
Seasoned Member
Join Date: Oct 2009
Location: Portland, Oregon
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0L
Most people just redrill, but you can use an aftermarket trac bar if you want. Rustys makes one for stock height to 2" lift, and I have a Rough Country one that is sold for 4"+ lifts, however they said will work for a 3" lift or even less when I called about it.
#5
Senior Member
Join Date: Jan 2011
Location: Dalton, MA
Posts: 645
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O. 180K miles
I still have a stock track bar with my 3" lift... Haven't had any problems since april but im sure my alignment could be better. don't have any problems with it pulling around on the road though. Funny thing is I have an adjustable one sitting in my garage, Im just too lazy to install it since I dont have any problems with my stock one and I'm scared away by the rusted castle nut
Thread
Thread Starter
Forum
Replies
Last Post
RunnerInPink
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
25
10-10-2017 10:34 AM
xjallseasons
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-29-2015 08:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)