6.5 leafs drop mounting brackets from r.c. And shackles ? Or try like bronco grave yard we bought a set of alost 12 inch lift leafs

 

A MJ lift spring may give you 10, I thought someone suggested a stock MJ spring. My bad on that misunderstanding.

You will also stretch the wheel base, iirc.

 

they bolt in and give about 5" of stiff unflexy lift

you need a custom built pack. it wont be cheap. or get some 6.5s with relocation brackets and shackles.im sure youre just building this for mud

 

not for mud. i just put my rear axle in and im on the hunt for some rims and im gonna borrow some 39.5 inch tires and see where my lift it then.. but now that im thinking about it im gonna wait until front in under jeep and finished to see about rear leaf.. i dont want blocks. i got my anti wrap 6.5 -7 inch perches in.. so now to weld those on and start on front.. that'll be some work.. d30 to d60

 

Why not link the rear and use coils?

Better flex and better ride.

 

im gonna look into that also.. how would you mount the coils on frame?

 

Weld perches...just like what you would need to do for the links...

 

If you get the kit from I think iron rock( I've seen it don't remember brand) then it comes with coil mount plates for the unibody and and axle. Or get plates from a tj and get long arms and home brew.

 

http://claytonoffroad.com/xjcc.htm found it.. looks easy enough.. man i need to get these axles in and done!!!

 

i used a Rustys 6.5" spring and added another leaf. so 7.5" + 2" shackles and shackle relocation adds another 1" or so.

 

this what you want?

 

ive found a couple of places that will make 10 inch lift leafs but the want like 250.00 a spring i went with the 6.5 2.5 wedge block anfd 2 inch drop shackles got 11 inch out of it .

 

hell yeahh!! j/k im not looking to use blocks but something a little less in lift than pictured