Xj doors
#1
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Van Buren Arkansas, was Joplin Missouri
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Xj doors
How can I make my doors where I can quickly remove and reinstall them for summer time wheeling and cruising? Could someone help? Thanks..
#2
CF Veteran
Join Date: May 2010
Location: Western Michigan
Posts: 1,680
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0l inline 6
Easiest way? Use the search button
Using a two words in the search area, I found this for you;
https://www.cherokeeforum.com/f51/re...y-cheap-90496/
https://www.cherokeeforum.com/f51/re...y-cheap-90496/
#3
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Van Buren Arkansas, was Joplin Missouri
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Thanks that is what I was thinking I had to do. This was just something to make sure this was what I need to do.
#6
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Van Buren Arkansas, was Joplin Missouri
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
It's a 1990. And I'm doing all doors. But the bad thing is I'm electric any input is helpful. I'm going to move speakers forsure.
#7
Member
Join Date: May 2011
Location: CT
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L I6
ya i wanna do all 4 but then i wont have mirrors on the side either and wouldnt know what to do with the wires for the speakers. i would think there would be some way that you can make it so you can just plug it back everytime you put them back on
Trending Topics
#8
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Van Buren Arkansas, was Joplin Missouri
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Yeah I'm going to make a plug so I can. And I'm thinking the mirror deal u could get some cheap old style ones and mount on the "a" pillar by the windshield. I'm thinking that's what I'm gonna do. I'm going to go exo cage soon to. So I may mount some that hang down.
#9
Senior Member
Join Date: May 2010
Location: Here, There, Everywhere
Posts: 745
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Grand Cherokee
Engine: 5.2
ok fellas for the speaker problem i have a pretty good set up i believe. so who doesnt like to listen to music when your running doorless??? not me. so...... i took 2 old house speakers tweeters and all. ripped out the door speakers cuz mine were blown. so no electrical in the doors now. on the bottom of your dash the runner piece. there are two "vent" looking deals on both ends. on some models these were used for tweeters. so you take the old house speakers and put them on the back side of the vent deals. i cut a hole in my runner piece and installed the tweeter there but it looks really ghetto. but if i was to do it again i would install the tweeter in the A piller plastics. if you need pictures i can probably find some for ya
#11
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Van Buren Arkansas, was Joplin Missouri
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Thanks guys, this all will help me w my rig. I'm in sw Missouri so the doors will go back on in the winter. When I figure out how to upload pics from my iPhone onto here I'll show my rig.
#12
Junior Member
Join Date: Aug 2010
Location: southside indy
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
For the mirrors I used a like a 5 in dish mirror like on semis, and put a long bolt and velcro, the bolt goes in the pin location when doors r off and velcro were it contact the jam to keep it from moving around works pretty good
#13
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Van Buren Arkansas, was Joplin Missouri
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Yeah I work at a semi truck dealership. We do have parts I'm gonna use on my rig. I'm trying to get a air tank from one so I can have onboard air.
#14
Member
Join Date: May 2011
Location: CT
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L I6
took my back ones off i think it looks awesome i get alot of looks. idk if i wanna just rip my front speakers out. i like the rugged look, not the ghetto look lol
#15
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Van Buren Arkansas, was Joplin Missouri
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Not to bad. I'm doing mine this sat. Just gotta still figure out how to post pics. Lol