What did you do to your Cherokee today?
Seasoned Member
Joined: Jun 2009
Posts: 294
Likes: 0
From: West Michigan
Year: 2000
Model: Cherokee
Engine: 4.0l IL6
Pounding it out
Pulled of the front clip so I could bend some metal for the fenders back in place, and paint the front cross-member so it would blend in behind the bumper.
Pulled the Drivers side fender to hammer out some dents and fix my fender clips.
Tried to make a sleeve for my passenger side tie-ins to go inside the inner frame (There is no internal bracing on that side) out of a 12mm deep well. It is the exact side, just a little long. I could not for the life of me drill a 7/16th through the socket. Stupid hardened steel.
Pulled the Drivers side fender to hammer out some dents and fix my fender clips.
Tried to make a sleeve for my passenger side tie-ins to go inside the inner frame (There is no internal bracing on that side) out of a 12mm deep well. It is the exact side, just a little long. I could not for the life of me drill a 7/16th through the socket. Stupid hardened steel.
Last edited by DortDizzle; Jun 10, 2011 at 07:36 PM.
Junior Member
Joined: May 2011
Posts: 92
Likes: 0
From: Traverse City
Year: 2000
Model: Cherokee
Engine: 4.0L i6
Originally Posted by 1996XJSport
Finally done working on my new HID setup. I'm now running Morimoto Mini Bi-Xenon D2S Projectors w/ Clear Lens Upgrade from The Retrofit Source, 35 Watt Ballasts, and 5000k bulbs.... Daylight Anyone? 
Junior Member
Joined: May 2011
Posts: 92
Likes: 0
From: Traverse City
Year: 2000
Model: Cherokee
Engine: 4.0L i6
Originally Posted by joppoman
Well, the thermostat is replaced, as is the housing, the gasket, and a hose.
Junior Member
Joined: May 2011
Posts: 92
Likes: 0
From: Traverse City
Year: 2000
Model: Cherokee
Engine: 4.0L i6
During the madness that is NYC parking, today I managed to gift a massive dent in the hood (mid-hood i might add) of a Chrysler Town & Country compliments of my trailer hitch coupled with a 3" lift on 33's and a parking spot fit for a mini cooper. Felt awful and left a note with contact info. So far no phone call, but I hope to rectify my mistake. Jeeps+NYC=?
), mainly just to get outta town.lol
CF Veteran
Joined: Sep 2010
Posts: 1,992
Likes: 0
From: West Bloomfield,MI
Year: 1996
Model: Cherokee
Engine: 4.0L, CAI, Edelbrock Breather, Optima Yellowtop
I paid:
$20 for the housings
$110 for the projectors
$30 for the shrouds
$5 for the angel eyes
$50 for the ballasts
$30 for the bulbs
$35 for all the supplies needed
$15 for the D2S adapters
so almost $300, maybe more with shipping taken into consideration. Its the same price if not more than the Norcal projector headlights but with my setup, you have a high beam so I think it's worth every penny.
