When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
There's a red one for sale in Olean new York for 2200
Had to look it up because I lived in Olean for a time. That jeep is being sold by supreme auto parts. The guy that runs that, Joe, is by far the most shady auto dealer I've ever met. To many horror stories. He has cops there investigating things almost weekly, if that means anything.
Had to look it up because I lived in Olean for a time. That jeep is being sold by supreme auto parts. The guy that runs that, Joe, is by far the most shady auto dealer I've ever met. To many horror stories. He has cops there investigating things almost weekly, if that means anything.
as awesome as a rhd build would be, trying to find replacement parts locally has to be a huge pita. Ill stick to the standard XJs just didn't know if anyone would be interested. that's definitely good to know though thanks
almost everything on the rhd is identical to a lhd.. the steering box is on the other side of it and the trac bar goes the other way of course. basically just has a flipped firewall ,dash,steering.
Finish replacing all my u joints. Did PS axle and front driveshaft today. I have had the parts to do the work for a few months now just no time to do the work.
Still hunting for the cause of the creaking noise at full lock. It is worse at the end of the RH lock. I can not see any play or movement in the track bar, nor any cracks it the frame near the steering box and track bar mount. The sound seems to be coming from the DS knuckle so I am thinking it is either the lower ball joint, greasing the upper made no difference, or there is a crack hiding where I can not see it
Next weekend I am going to start pulling the PS box and track bar mount to see if I can find a crack. If I still don't find anything it is new ball joints all around.
Replaced the cross pin in Aussie Locker. Locker was randomly unlocking while driving straight. Cora at Aussie Locker reviewed the issue and looked at pictures I supplied, suggested I try another crosspin. XJWonders mailed me one and locker seems to be functioning normally! Picture of old pin. Gear oil was one month old, so I reused it.
Also touched up the wheels, metallic black.
Replaced the cross pin in Aussie Locker. Locker was randomly unlocking while driving straight. Cora at Aussie Locker reviewed the issue and looked at pictures I supplied, suggested I try another crosspin. XJWonders mailed me one and locker seems to be functioning normally! Picture of old pin. Gear oil was one month old, so I reused it.
Also touched up the wheels, metallic black.
I hope u had fun unwrapping it as much I had fun wrapping it up lol
I hope u had fun unwrapping it as much I had fun wrapping it up lol
Oh yea, knew I was in for an ordeal once I opened the box. Took me longer to unwrap it than it did to install. Had to use a razor knife and cut through many layers at a time..
almost everything on the rhd is identical to a lhd.. the steering box is on the other side of it and the trac bar goes the other way of course. basically just has a flipped firewall ,dash,steering.
see that's what I had thought but people I've talked to told me otherwise
Haha. No. I wrapped the pin with about 12 of those Tyvek envelopes provided by post office, along with lots of tape, and post office stickers lol then stuffed it into a flat rate box
