What did you do to your Cherokee today?
CF Veteran
Joined: May 2011
Posts: 6,098
Likes: 250
From: DE
Year: 1988
Model: Cherokee
Engine: I6 4.0
CF Veteran
Joined: Nov 2011
Posts: 3,603
Likes: 3
From: SLC, Utah
Year: 1999
Model: Cherokee
Engine: 4.0L
Good eye. Yea these are the 33x10.50's I ran before the 35's. In the summer with 100-105* days tranny temps were way too high with the 35's so I put them on my YJ. This spring It'lol get regeared and And I'll probably go with a 33x12.50 or 35's again All the trails here are getting dug out cause idiots in jk's running 37-40" rubber
Senior Member
Joined: Aug 2012
Posts: 533
Likes: 0
From: Sparks, Nv
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Took my bumper caps off and broke the steering box bolts free to install the C-Rok Steering Box Brace I'll probably get to that when I get a 5/8 drill bit but for the meantime just tightened the bolts back up.
Does anyone know if you need the Putco H4 harness to use the truck-lite LEDS?
Does anyone know if you need the Putco H4 harness to use the truck-lite LEDS?
Senior Member
Joined: Nov 2013
Posts: 737
Likes: 31
From: Alaska
Year: 1999
Model: Cherokee
Engine: 4.0L I-6
Had my spare tire moved onto the 15x6 steel rim that my old spare was on. Just seems to fit in the holder better than when on a 15x7 steel rim, although I can't conveniently rotate it in. Also dug out the cold front and put it on.
Last edited by Bluelight; Oct 4, 2014 at 11:40 PM.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Yep.
I worked on my half doors the last few days.
I'm keeping this cut because of the way it looks with the body lines and because I can now lean out over the door which is all I wanted. I was tired of squeezing through the window.
Should have both welded up tomorrow morning. Just need to bondo some spots and paint. After my trip next weekend I'll figure out an inside latch and add some speakers.
Moderator CF K9-unit
Joined: Apr 2012
Posts: 5,842
Likes: 12
From: Alaska
Year: 2000 sport
Model: Cherokee (XJ)
Engine: New 4.0l from s&j engines
Yep.
I worked on my half doors the last few days.
I'm keeping this cut because of the way it looks with the body lines and because I can now lean out over the door which is all I wanted. I was tired of squeezing through the window.
Should have both welded up tomorrow morning. Just need to bondo some spots and paint. After my trip next weekend I'll figure out an inside latch and add some speakers.
I worked on my half doors the last few days.
I'm keeping this cut because of the way it looks with the body lines and because I can now lean out over the door which is all I wanted. I was tired of squeezing through the window.
Should have both welded up tomorrow morning. Just need to bondo some spots and paint. After my trip next weekend I'll figure out an inside latch and add some speakers.
CF Veteran
Joined: Sep 2011
Posts: 10,447
Likes: 0
From: Frederick, MD
Year: 1989
Model: Cherokee
Engine: 4.0
Yep.
I worked on my half doors the last few days.
I'm keeping this cut because of the way it looks with the body lines and because I can now lean out over the door which is all I wanted. I was tired of squeezing through the window.
Should have both welded up tomorrow morning. Just need to bondo some spots and paint. After my trip next weekend I'll figure out an inside latch and add some speakers.
Senior Member
Joined: May 2014
Posts: 946
Likes: 0
From: Iroquois Ontario Canada
Year: 1998
Model: Cherokee
Engine: 4.0
Finished up the patches and 6X2 rocker on the passenger side in between rain showers. I was sitting on the creeper shaping the final patch and saw this guy watching me.
I had just finished cleaning up the area with that grinding wheel and I think he was soaking up what was left of the heat in it. his shell is just a little bigger than a quarter. Odd to have a snapping turtle this far from water though.
I had just finished cleaning up the area with that grinding wheel and I think he was soaking up what was left of the heat in it. his shell is just a little bigger than a quarter. Odd to have a snapping turtle this far from water though.
CF Veteran
Joined: Sep 2012
Posts: 1,623
Likes: 13
From: In a large sandbox
Year: 1998
Engine: 4.0
Got the lift installed on the '97 project I bought a few months back but forgot to tell the man I had install the lift to remove the factory front coil isolators. Looks like I'm going to have replace the pitman arm and drag link; the angles on the joints look too severe to be reliable for long...
CF Veteran
Joined: Aug 2012
Posts: 1,592
Likes: 0
From: oregon
Year: 1993
Model: Cherokee
Engine: 4.0 ho 99 intake ps pump 1" tb spacer 62mm bored tb eletric fans and more
Finished up the patches and 6X2 rocker on the passenger side in between rain showers. I was sitting on the creeper shaping the final patch and saw this guy watching me.
I had just finished cleaning up the area with that grinding wheel and I think he was soaking up what was left of the heat in it. his shell is just a little bigger than a quarter. Odd to have a snapping turtle this far from water though.
I had just finished cleaning up the area with that grinding wheel and I think he was soaking up what was left of the heat in it. his shell is just a little bigger than a quarter. Odd to have a snapping turtle this far from water though.
I couldnt help it. pics of the rockers?
