UN-twist the lines!! Disconnect one side and reattach without twist. Mine tuck nicely back towards control arms that way

 

Ok thanks! I've seen everything from twists to zip ties and didn't know what would be best

 

Very interesting observation.

 

I've bought my plugs from the dealer. Though they came in Mopar boxes, they've been both Champion and NGK, and that was even before the Fiat deal.

Today, I took a stroll through the JY and found a factory cassette radio with mounting bracket. It looked rough, but I plugged it in and it worked fine, so I cleaned it up and popped it in. Much better fit than the aftermarket radio with a broken plastic mounting bracket.

I know I shouldn't be buying stuff for it until I find out about the head, but I couldn't pass this one up!

 

Started my first of several EMT roof racks. I've got enough of the black grating to make 3 others.

Just did the bending there, need to trim the ends down so the rack is 4'x6', put in two cross rails, 8 upprights, another halo and gutter mounts. No welding. Butted ends will have a piece of rigid pvc as a core, and all my supports and cross rails will be smaller diameter tubing fit into holes drilled in the main halos. Self tapping screws will hold it all together, and heavy duty zip ties or u bolts will hold the grates down.

 

Worked a little on fitting the indash more, gotta play with the positioning and fab up something to fill the top and bottom space but so far im pretty happy with the progress.

 

That's nice! I'd love to have that just for gps alone.

 

what'd you do with the heat and ac controls?

 

+1

 

Built a snorkel the other day

 

Simple day, wrapped the rest of the injectors, raised the passenger hood up with washers again for the warmer weather, greased the shackles and removed one puck from the bumpstops.

 

what'd ya use?

 

Fixed stereo and tightened some interior screws that went loose from my last off road.

 

2" PVC (10ft pipe, used about 5ft), 1 threaded joint with a nut for the other side, 2 45° pieces, and 2 90° pieces. Some PVC cleaner and glue, and some RTV silicone for an extra layer of protection

 

Finished gas tank and shock hoops, last place I'll post this lol