OP_Rover

Haha I guarantee I could do it much quicker now. But it was my first time every doing it and I pulled all the belts off like a dummy. And the tension pulley that kept them on so it took me extra time to set it all up again. But on a difficulty scale id give it a 2 out of 10. On a PITA scale based off of what I did? 5 out of 10.

sycoglitch

So true. Heck the hardest part with mine was the stock plug on the stock alt. Didnt wanna come off. New one went one in 2 mins

rtralabama

Finally bought a optima battery. Washed off the alternator. Gotta figure out why auto tranny won't shift till higher rmps too

my89xj

I went through 8 duralast ones lol.
Year? Check the fluid level.

rtralabama

2000. I just checked it the other day. Gonna check out again tho. Maybe a sensor too.

AndeUSMC

Same thing with Crank Position Sensors. First one took me an hour, I just put the old one back in to read the voltage and it took 10 minutes.

Barrelmaker

Diff covers came in.

ThatPurpleXJ

Check your tps. Mine went bad after getting wet and told the engine I was at 77% throttle all the time so it wouldn't shift until 4000rpm

Basslicks

have you adjusted your kickdown cable?

cruiser54

That's really not a kickdown cable. It's a TV cable. Throttle Valve. Increases the transmission fluid line pressure more as the throttle is opened further.

TPS tells the TCM the throttle position so it can electronically select the proper gear.

Always a good idea to adjust it as it's very simple to do and increases shift firmness.

Fester2572

Looks good. I'm going to do that myself soon. I hope that's not the same wheel in both pics. If it is , you might want to go and get it balanced.

JeepingDan

Got my 23 year old A/C cranking cold.

bakas

Replaced fuel filter.. Next CPS.

ThatPurpleXJ

Woo new tires
Anyone want a free 33? Quarter tread

sycoglitch

Good deal, that tire is perfect for trail only. Does it hold pressure well :P