What did you do to your Cherokee today?
Senior Member
Joined: May 2009
Posts: 559
Likes: 0
From: Middlesex County CT
Year: 1993
Model: Cherokee
Engine: 4.0 H.O
Changed out the transmission mount yesterday. Finally my exhaust isn't knocking on the crossmember anymore!
But i did snap off one bolt on the drivers side that holds the crossmember on. Hopefully this damn rain lets up soon today so I can get outside and drill/tap a new hole.
But i did snap off one bolt on the drivers side that holds the crossmember on. Hopefully this damn rain lets up soon today so I can get outside and drill/tap a new hole.
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
my dad was sick of these pritty mall crawlers that came with his 2005 tj, so he took my big O xt's knowing Im getting swampers!!!
& i just got off the phone with 4wheelparts for these 31x11.5R15 LTB bias
http://www.4wheelparts.com/Tires/Sup...t_pn=SSTLTB-01

& i just got off the phone with 4wheelparts for these 31x11.5R15 LTB bias
http://www.4wheelparts.com/Tires/Sup...t_pn=SSTLTB-01
CF Veteran
Joined: Nov 2008
Posts: 6,989
Likes: 4
From: Oak Harbor, WA.
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
So, after replacing the broken tierod end on my track bar the other day I noticed a God Awful scraping noise coming from the front end when I turned. Couldn't figure it out for the longest time then realized it was coming from the passenger side. I hadn't messed with that end of the track bar but, I figured what the heck. The bolt turned maybe a half turn tops then the torque wrench clicked. Batta Bing Batta bang, no more noise. I couldn't believe it being loose just that little bit was making that nasty loud scraping noise when I turned. Just goes to show you how much a TB can be effected even when just a little loose let alone adjusted wrong.
CF Veteran
Joined: Nov 2008
Posts: 6,989
Likes: 4
From: Oak Harbor, WA.
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Builtnotbought...No offense, bro.....but, them REEEEEEEEims belong on an Escalade not an otherwise very nicely built XJ like yours.
CF Veteran
Joined: Apr 2008
Posts: 1,052
Likes: 2
From: Lakewood, Colorado
Year: 1990 2dr base
Model: Cherokee
Engine: 4.0L
I pulled the headliner out today, was sick of it hanging on my head. The plan was to replacing it but I kind of like it without. We’ll see how hot it gets.
I took the night off from the Jeep, and took the wife out to dinner!!
I pulled mine out, and I notice the noise increase more than temperature.
I pulled mine out, and I notice the noise increase more than temperature.
Senior Member
Joined: Jan 2009
Posts: 684
Likes: 0
From: Brooklyn, In
Year: 1987
Model: Cherokee
Engine: 4.0
since my 87 is locked up i looked for another trail rig and found a 88 so i bought it last night and put 33 on it and hooked up a hook on the rear and after work planning on putting the dring on the front along with a hook
Senior Member
Joined: Jan 2009
Posts: 684
Likes: 0
From: Brooklyn, In
Year: 1987
Model: Cherokee
Engine: 4.0
a href="http://s878.photobucket.com/albums/a...t=100_2591.jpg" target="_blank"><img src="http://i878.photobucket.com/albums/a...h/100_2591.jpg" border="0" alt="Photobucket"></a>





