installed my snorkel, now just one more big hole for the flex tube and figure a way to make up an air box for a cone filter.

 

Im gonna use an old VW airbox from a 1973 Super Beetle once I can figure out how and where Im gonna mount it lol

 

Pics.......thinking about doing one on mine......put a new t-stat housing and radiator cap also used water wetter then drove it to the drive in in midtown

 

Got my front hitch put on... 1 hour turned into 3 lol. I'll post pics tomorrow after i fix/ put everything back together

 

Is it the stock lug nuts. If so which ones did you round off the outside 19s or the golden inside 18mm part

 

needed to change my antifreeze,sooo i tried to take out the block plug and the 3/8 extention is to big, oook, i find a drain plug socket set at harbor freight, metric square and hex heads and 5/16 and 3/8. 5/16 fit and 8mm fit,but no leverage and the damn square hole started rounding out. soooo i just pulled the lower rad hose and it drained and started runnin water thru it as it started gettin dark. will finish it tomorrow. looked like i had a little oil in the water,but no water in oil or tranny. and my thermo housing was kinda loose,i think oil seeped in the top from my leaking valve cover right in front. oil around the stat and inside the housing.

 

I repainted my floors. (inside) (sanded, primer and Bedliner) Next is under the jeep. (floor, unibody, tracbar, tie-rod..whatever we see basically lol)

 

Made a flag pole out of a hitch reciever. Didn't drive with it yet, the flag I have is just a big, its about 3" from the road, so I need to get a smaller one.

 

Nice

 

That should be fine. Just keep her off the ground and in the light.

 

Almost lost her in a creek crossing. She started to float.

 

Jeeps float?!!!!!

 

I knew VW's did lol

 

It did for a second. The back end atleast.

 

Wow that would freak the hell out of me