What did you do to your Cherokee today?
Senior Member
Joined: Dec 2008
Posts: 990
Likes: 4
From: Washington State
Year: 1996
Model: Cherokee
Engine: 4.0L HO
I vacuumed, wiped down the interior and door jambs, as well as removed some white paint that seemed to splatter alllllll over the rig by the PO. Dont know how that could happen. Squeaky clean
Newbie
Joined: Jan 2009
Posts: 20
Likes: 0
Year: 99
Model: Cherokee
Engine: 4.0
Went and bought some stock 5 spokes with almost new tires. Tried to get them put and then found out I have an axle swap from a ZJ or something with rear discs - so the stockers wouldn't fit. Also tried to install the rear tire carrier which is in pieces right now. It looks pretty scandalous on there with no spare.
Seasoned Member
Joined: Jan 2009
Posts: 326
Likes: 1
From: Mountains
Year: 1999
Model: Cherokee
Engine: 4.0
Today was fun...
Dad and I replaced all the shocks on the Heep. Had to cut the rear floor and remove the weld-nuts and replaced them with grade 8 hardware. Front shocks went in smoothly. What a project that was.
Dad and I replaced all the shocks on the Heep. Had to cut the rear floor and remove the weld-nuts and replaced them with grade 8 hardware. Front shocks went in smoothly. What a project that was.
Senior Member
Joined: Nov 2008
Posts: 972
Likes: 12
From: south bend indiana
Year: 1993
Model: Cherokee(XJ)
Engine: 4.0 i six H.O.
Junior Member
Joined: Jan 2009
Posts: 41
Likes: 0
Year: 1998 XJ (Custom ORVIS EDITION)
Model: Cherokee
Engine: 4.0 HO
Cleaned my black and gooey throttle body, got a used IAC valve from the bone yard, wired in a second set of hella 500's and put a 04 Tj steering wheel in.
Junior Member
Joined: Jan 2009
Posts: 97
Likes: 0
From: Bloomington, IN
Year: 2001
Model: Cherokee
Engine: 4.0L I-6
got my rear UBEs re-SECURED (one bolt missing and two loose after shop "fixed" it).
changed out pinion seal
fixed upper rear shock mount bolt and put on final shock in the rear
Tomorrow i have to change the oil and patch up the holes in my trunk
changed out pinion seal
fixed upper rear shock mount bolt and put on final shock in the rear
Tomorrow i have to change the oil and patch up the holes in my trunk
Newbie
Joined: Jan 2009
Posts: 9
Likes: 0
Year: 1988
Model: Cherokee
Engine: 4.0L
Took it to the carwash with a few cans of engine cleaner. I had to get the heavy duty coat of oil off of the underside. Last night was the wonderful rear main seal replacement to prevent said heavy duty coat of oil. I think that is the dirtiest I have ever been.
Junior Member
Joined: Dec 2008
Posts: 94
Likes: 0
From: Cambridge, MA
Year: 1992
Model: Cherokee
Engine: 4.0L HO
I got my power locks working again today, wasn't too tough, but I had to go buy some new tools first...
So I bought a bunch of new toys... er tools. Sweeeeet.
So I bought a bunch of new toys... er tools. Sweeeeet.
Newbie
Joined: Jan 2009
Posts: 17
Likes: 0
Model: Cherokee
fixed the dent where the drivers door was hitting the fender, put in a new drivers seat as the old one was shot, put all new taillights and marker lights, put some new 16in wheels and tires on it (well new rims but the tires are not so new).
before
after
before
after
Seasoned Member
Joined: Dec 2008
Posts: 348
Likes: 4
From: 25 Miles From Moab!
Year: 1998
Model: Cherokee
Engine: 4.0
