well got mad at the jeep did a lot of repairs from intake to oil change spark plugs cap rotor idler pulley belt tensioner pulley power steering pump and just found out the fan clutch is bad and i also need a c compressor cause the bearing is grinding after all this work and my indash crap says my coolant sensor is bad ? amd washer fluid low which i know its low other then that this is the last of the repairs

 

Sounds like you need to get some rest tonight!

 

At least you'll know everything that has been repaired.

 

i know the feeling man. what i normally do is just get away from the jeep for a few hours and stop thinking about it and then go back and work on it after i cool down. dont give up!

 

Drink a beer, or 6. Wake up and make it happen. You know you aren't at the last straw or you wouldn't be here. We love our jeeps and hate them sometimes, just like women

 

lmfao guys yeah its beeen like this for a while its my sis jeep i do all the repairs and emissions is the main one no codes i also grounded the exhaust as an issue i've seen with these trucks i redid the clamps and put in a glass pack so now its loud lol
but i noticed at idle ac compressor bearing screaming and fan clutch not spinning fast enough and trucks temp hit 190 200 and i have a 160 thermostat in there i just did the intake no leaks and it was doing this before.
and i noticed the fan not cooling it off and the coolant is green and the trucks runs good no leaks so yeah i'm pondering at the coolant sensor on my dash saying its bad on the cluster so i changed it with 2 used ones and still doesn't go out there plenty of coolant