Welder questions
#1
Member
Thread Starter
Join Date: Jan 2012
Location: Daytona Beach, FL
Posts: 171
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Welder questions
So I'm an electrician not a welder by any means but want to pick up a cheap welder from harbour freight to mess with. This is the one I was looking at...
http://www.harborfreight.com/90-amp-...der-98871.html
My question is that if I do purchase this thing will it be strong enough to do little fab jobs like roof racks, rocker panels etc etc?
http://www.harborfreight.com/90-amp-...der-98871.html
My question is that if I do purchase this thing will it be strong enough to do little fab jobs like roof racks, rocker panels etc etc?
#2
CF Veteran
Join Date: Feb 2011
Location: Long Beach, Ca
Posts: 3,500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
That welder would be good for small projects. It says in the description it welds 22ga to 3/16" steel.
I have a Millermatic 135 that does the same thing. If you want to learn then that harbor freight welder will be perfect. Just get some scrap pieces and practice. Make sure you're running on a single outlet line that's on a 20amp breaker or you'll be popping the breaker every 30 seconds
I have a Millermatic 135 that does the same thing. If you want to learn then that harbor freight welder will be perfect. Just get some scrap pieces and practice. Make sure you're running on a single outlet line that's on a 20amp breaker or you'll be popping the breaker every 30 seconds
#3
CF Veteran
Join Date: Dec 2010
Location: Spanish Fork, Utah
Posts: 2,366
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: Renix 4.0L
Yes I have that lil' guy too. I use it for thin stuff, and it's what I learned on. I've since upgraded. But that thing will do anything you need that's light duty.
#4
Junior Member
Join Date: Nov 2011
Location: Vermont & Central NH
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6 W/upgraded Bosh Injectors
I would not waste the money, personally... I would get a gas welder the fluxcore wire is very messy and will require a lot of clean up. I got a Hobart Handler 140 from Tractor Supply as a kit and it was like 450$
#5
CF Veteran
Join Date: Oct 2010
Location: Ontario, Canada
Posts: 2,150
Likes: 0
Received 12 Likes
on
9 Posts
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
It's good for light fab, leave it set up for quick work access. A little more cleanup than gas shielded. Scrub your welds clean befor any paint. Can't beat the $$, really.
Get yourself a decent helmet. Protect bare skin from the uv light. Use a better welder if your doing structeral or load bearing builds/repairs. If I could buy that welder here for $100 I would.
Get yourself a decent helmet. Protect bare skin from the uv light. Use a better welder if your doing structeral or load bearing builds/repairs. If I could buy that welder here for $100 I would.
#6
Member
Thread Starter
Join Date: Jan 2012
Location: Daytona Beach, FL
Posts: 171
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Originally Posted by askingxforxit
That welder would be good for small projects. It says in the description it welds 22ga to 3/16" steel.
I have a Millermatic 135 that does the same thing. If you want to learn then that harbor freight welder will be perfect. Just get some scrap pieces and practice. Make sure you're running on a single outlet line that's on a 20amp breaker or you'll be popping the breaker every 30 seconds
I have a Millermatic 135 that does the same thing. If you want to learn then that harbor freight welder will be perfect. Just get some scrap pieces and practice. Make sure you're running on a single outlet line that's on a 20amp breaker or you'll be popping the breaker every 30 seconds
#7
Member
Thread Starter
Join Date: Jan 2012
Location: Daytona Beach, FL
Posts: 171
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Originally Posted by Transporter
I would not waste the money, personally... I would get a gas welder the fluxcore wire is very messy and will require a lot of clean up. I got a Hobart Handler 140 from Tractor Supply as a kit and it was like 450$
Trending Topics
#8
CF Veteran
Join Date: Feb 2011
Location: Long Beach, Ca
Posts: 3,500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Originally Posted by Sean1125
Well for never welding in my life 100 bucks sounds alot safer than 450
#9
Junior Member
Join Date: May 2010
Location: Wichita KS
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0l
i just got a Lincoln Electric sp140t i love the gas, flux core cost more per lb if you get a large tank of 75%arg25%co2 it will end up being being cheaper to use solid wire. i got mine for $350 brand new in the box off craigslist. its worth the extra money. also i had a regular mask and i bought a hobart auto-dimer helmet. hope this helps.
#10
CF Veteran
Join Date: Oct 2010
Location: Ontario, Canada
Posts: 2,150
Likes: 0
Received 12 Likes
on
9 Posts
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
Ive got a Lincoln 180, I would still buy that for $100 if we could get such deals. I hate wastin time in set up for projects, want the tools set to specific use and ready to go. It's a good deal. I see that welder becoming a future option for on board trail welder powered by an inverter.
#11
CF Veteran
Join Date: Feb 2011
Location: Long Beach, Ca
Posts: 3,500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
I'm running flux core out of my Millermatic and its actually not that bad. Its not really splattering much more than with shielding has
#12
Seasoned Member
Join Date: Jun 2009
Location: newberg
Posts: 327
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0L
The HF ones work kinda. Go check home depot the sell lincoln. They had a 125 on sale for 279 a few weeks ago. It doesn't have the option for gas but hey its cheap. I run a hobart flux and a rhino with 98/2 gas for hot n heavy.
#14
Senior Member
Join Date: Jan 2011
Location: Dalton, MA
Posts: 645
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O. 180K miles
I have this welder and I pretty impressed with it considering the price, with some beveling and the highest setting it can handle 1/4th if you know what your doing. Ditch the stock wire and pick up a 2lb spool or two of lincoln .030 flux cored at home depot. The welds aren't clean, you will have some slag but thats how flux cored works. Unless you will be welding heavy stuff or welding very often I recommend it. It's helped with with countless projects for a year now and its holding up great.
#15
Member
Thread Starter
Join Date: Jan 2012
Location: Daytona Beach, FL
Posts: 171
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 I6
Originally Posted by huntingman2706217
This is not fab... Read the stickys... Read the thread made specifically for this...