Track Bar
#3
#4
CF Veteran
Join Date: Jul 2012
Location: Hudson, FL
Posts: 3,683
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L Inline 6
Rough Country gives you the adjustable track bar and the bracket + hardware for $130. A lot cheaper than the above $170 combination and I recommend it because I have it and had no problems with it:
http://www.roughcountry.com/jeep_xtras_1079.html
I'm a Rough Country nut.
http://www.roughcountry.com/jeep_xtras_1079.html
I'm a Rough Country nut.
Last edited by thatXJguy; 08-31-2012 at 11:05 PM.
#5
CF Veteran
Join Date: Jun 2011
Location: KY
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 L6
i have that same RC track bar i like it just fine but the heim joint was trash so i replaced it with this http://www.tmrcustoms.com/store/inde...oducts_id=1439 now its great...but if i had it to do all over again id go with this one http://www.ironrockoffroad.com/Merch...egory_Code=PFX
Trending Topics
#8
Rough Country gives you the adjustable track bar and the bracket + hardware for $130. A lot cheaper than the above $170 combination and I recommend it because I have it and had no problems with it:
http://www.roughcountry.com/jeep_xtras_1079.html
I'm a Rough Country nut.
http://www.roughcountry.com/jeep_xtras_1079.html
I'm a Rough Country nut.
Some things are more important than the bottom line.
"The bitterness of poor quality remains long after the sweetness of a low price is forgotten."
#9
CF Veteran
Join Date: Jun 2009
Location: Columbus, Ohio
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
That was Rusty's.... never seen a post about an RC track bar snapping... It's rusty's crappy welds
I have the Iron Rock Offroad double sheer trackbar, and love it. I was amazed at how heavy and solid it was when it got here.
I have the Iron Rock Offroad double sheer trackbar, and love it. I was amazed at how heavy and solid it was when it got here.
#10
A chain is only as strong as its weakest link... i would never run anything that uses the stock bolts. (Broke a few myself before i upgraded to 1/2" then ultimately 9/16" in my custom trackbar) never fun having to track down a bolt in the middle of the woods and having to install it when for a few bucks more you wouldhave never had an issue. How about the time one of my bolts let go on the street, that could have ended much worse than it did.
Rockkrawler has been the best bargain out there for quite some time in my opinion.
Rockkrawler has been the best bargain out there for quite some time in my opinion.
#11
CF Veteran
Join Date: Jun 2011
Location: KY
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 L6
#12
CF Veteran
Join Date: Jun 2011
Location: KY
Posts: 1,492
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 L6
RC may not be the best but iv had my jeep on some pretty rough trails and never had a problem but like i said earlier if i had to do over again id but everything from Iron Rock Offroad...Now i do run and love Rustys upper & lower control arm and they are great and very beefy
#14
CF Veteran
Join Date: Jun 2009
Location: Columbus, Ohio
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
#15
CF Veteran
Join Date: Apr 2011
Location: Indianapolis
Posts: 4,825
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99 and '91
Model: Cherokee
RC makes two different track bars.
One for up to 4" lift and other 4-6" lift (something like that.) The lower lift one uses a TRE for the frame side mount and reuses stock track bar mount. The one for bigger lifts uses a heim joint of some sort Nd comes with a née double shear frame side mount. My dad has one of the later ones. Its plenty beefy. I have a IRO track bar waiting to go in my 91 its super stout... down right heavy in a good way. But I wouldn't call the better RC track bar a POS, and it is a good price. If I wasn't already ordering steering and other things from IRO I would have went with the RC
One for up to 4" lift and other 4-6" lift (something like that.) The lower lift one uses a TRE for the frame side mount and reuses stock track bar mount. The one for bigger lifts uses a heim joint of some sort Nd comes with a née double shear frame side mount. My dad has one of the later ones. Its plenty beefy. I have a IRO track bar waiting to go in my 91 its super stout... down right heavy in a good way. But I wouldn't call the better RC track bar a POS, and it is a good price. If I wasn't already ordering steering and other things from IRO I would have went with the RC