suggestions?
Thread Starter
Newbie
Joined: Dec 2010
Posts: 17
Likes: 0
From: windsor
Year: 1998
Model: Cherokee
Engine: straight six
so my thoughts...
without a camera, im limited to a brief description.
i have a fullsize stock tire mounted in the place it goes, and on the other side, a 13 inch tall, 15 inch deep, 13 wide sub box.
this leaves me very little room.
ive been poking around at the homebrew storage units you've guys come up with.
im looking for trunk space alternatives, and possibly a small tire carrier for the stock roof rack.
just looking for some ideas so i can give it a try.
anyone taken out the back seats and made a truck bed? this is what i want in the future...have'nt come accross the thread yet.
i've spent a few hours perusing the forums, i have'nt found what i was looking for yet, just wondering if you've seen these ideas before?
without a camera, im limited to a brief description.
i have a fullsize stock tire mounted in the place it goes, and on the other side, a 13 inch tall, 15 inch deep, 13 wide sub box.
this leaves me very little room.
ive been poking around at the homebrew storage units you've guys come up with.
im looking for trunk space alternatives, and possibly a small tire carrier for the stock roof rack.
just looking for some ideas so i can give it a try.
anyone taken out the back seats and made a truck bed? this is what i want in the future...have'nt come accross the thread yet.
i've spent a few hours perusing the forums, i have'nt found what i was looking for yet, just wondering if you've seen these ideas before?
Seasoned Member
Joined: Jun 2010
Posts: 397
Likes: 1
From: Illinois
Year: 1995
Model: Cherokee
Engine: 4.0 HO
instead of mounting the tire on the stock rack maybe search for homebrew rack ideas theres alot of them on here
alot of them you can find the material at home depot for around 60 dallors
or maybe even look into a hitch mount tire carrier if your not wanting to build or buy an entire bumper
as far as a truck bed i assume your wanting s chop top
if this is the case heres a couple good threads
https://www.cherokeeforum.com/f58/ch...erokees-34370/
https://www.cherokeeforum.com/f58/ho...-your-xj-2365/
hope this helps
alot of them you can find the material at home depot for around 60 dallors
or maybe even look into a hitch mount tire carrier if your not wanting to build or buy an entire bumper
as far as a truck bed i assume your wanting s chop top
if this is the case heres a couple good threads
https://www.cherokeeforum.com/f58/ch...erokees-34370/
https://www.cherokeeforum.com/f58/ho...-your-xj-2365/
hope this helps
Senior Member
Joined: Jan 2009
Posts: 545
Likes: 1
Year: 1994
Model: Cherokee
Engine: 4.0L Air Intake and TB Spacer
First:
https://www.cherokeeforum.com/f58/re...changes-58485/
Second for many different roof rack and tire carrier ideas:
https://www.cherokeeforum.com/f58/ho...ep-mods-21618/
Third some cargo area ideas:
https://www.cherokeeforum.com/f58/ca...ization-50674/
https://www.cherokeeforum.com/f58/re...changes-58485/
Second for many different roof rack and tire carrier ideas:
https://www.cherokeeforum.com/f58/ho...ep-mods-21618/
Third some cargo area ideas:
https://www.cherokeeforum.com/f58/ca...ization-50674/
I was thinking about one of these for the tire, its a cheaper way to rear mount a tire if you have a hitch. If you dont, i got a class 4 hitch for $25 at the junk yard.
http://www.etrailer.com/Trailer-Carg...rt/c31006.html
http://www.etrailer.com/Trailer-Carg...rt/c31006.html
Thread
Thread Starter
Forum
Replies
Last Post
jeepdewd
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
20
Aug 2, 2016 01:29 AM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
Dec 11, 2015 11:09 AM
tleed
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Oct 4, 2015 01:20 PM
Silentj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Oct 2, 2015 01:24 PM
redrooster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Oct 2, 2015 12:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



