Smojing out lights
#1
Senior Member
Thread Starter
Smojing out lights
SORRY FOR TITLE!! how should i go about having all the exterior lights on my Cherokee smoked out. should i have them tinted or like painted or what? post pix if you have any of your smoked lights
#2
Senior Member
Join Date: Mar 2010
Location: Miami,Fl
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 L6 Srt
Ive used the VHT Nightshade spray but tossed the lights because they didnt come out good. I did two light coats and when light was shown through you could see the imperfection.. I would prefer tinted that way if you dont want them anymore you peel it off.. i went with these lights instead of painting or tinting but might do a light tint to make it more dark.
#3
Senior Member
Thread Starter
yeah those look nice but they wont fit on my jeep cause i have a 96. how do you do the light tinting. will the tint come off if it gets wet? or is there like a spray that i can buy at a store to tint them?
#6
Senior Member
Join Date: Aug 2010
Location: Arcata California
Posts: 850
Likes: 0
Received 4 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
my buddie used a can of spray from a rc car hobbie shop. its for the windows on the body of the rc cars. Im not sure what its called but it came out pretty good.
Trending Topics
#8
Senior Member
Thread Starter
yeah ironically enough i used to be into the rc car thing and i have painted a few bodies. can you use like maybe window tint and tint the lights?
#13
Seasoned Member
Join Date: Sep 2010
Location: FT Myers, FL
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
i used night shade on my old car. came out great and i didnt wet sand at all. just did several light coats until desired tint.
the guy that had my jeep before me did the headlights (mines offroad only) and at night i cant see ****. so i just put lights up top to see. i recommend not doing headlights at all
the guy that had my jeep before me did the headlights (mines offroad only) and at night i cant see ****. so i just put lights up top to see. i recommend not doing headlights at all
#15
Seasoned Member
Join Date: Dec 2009
Location: Hoffman Estates
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 litre
i used niteshade on my tailights and it came out great just as everyone said you gotta do it carefully and make sure you doing light coats over and over again if not it can get running and you will see that shine through when you brake etc.
Last edited by JJaycXj; 10-05-2010 at 02:53 PM.