Short arm flex critics
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
I just wish they would come see something really haunted. Come here to the top of devil worshipers mountain to their old burned down mansion and take a brick.
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by xj_maniac_newb
I just wish they would come see something really haunted. Come here to the top of devil worshipers mountain to their old burned down mansion and take a brick.
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
A group of us went out there one night and got lost for like 3 hours... Now that was scary ****. I dont believe in most of this kind of stuff, but after a friend of mine took a brick from the foundation and almost died in a car accident a week later, i dont mess with it.. My grandmother also took a rose bush from there and planted it in her garden. That year everything in the garden died.
And it appears they already know about it.
http://www.paranormaltaskforce.com/corpsewood.html
And it appears they already know about it.
http://www.paranormaltaskforce.com/corpsewood.html
CF Veteran
Joined: Jul 2011
Posts: 1,411
Likes: 0
From: northlake IL
Year: 1997
Model: Cherokee
Engine: 4.0 I6
gf is that true?
me what is real?
gf that if you don't have sway bar you will burst into flames.
me i don't know i will have to do some research on that.
gf you have sway bars right?
me nope
gf can we go to the junk yard to get some bc i don't want to die?
me nope
gf why not!?
me because its a joke.
gf your an *** i wasn't gonna ride in your jeep ever again
me
Thread Starter
CF Veteran
Joined: Dec 2011
Posts: 3,643
Likes: 1
You guys that run 10in shocks are about a foot wider than me. that is a huge difference as far as flex goes. When you are narrow you have to flex a lot more to equal the same.
Here are my 10in bilstiens maxed out on the front. One side is bottomed, the other is extended all the way. I really need 14 in shocks and My control arm angle straightened out. So I will be working on it.
On the rear my 9 in shocks are max extended. I have inner fender tire rubbing issues that I loose 2in of travel. Which is the distance that my bumps are not touching. So with 1/2in spacers for the wheels and 1.5in blocks, as well as relocating the shocks I could gain it all back easily.
Plus my track bar is holding the left front from dropping an inch and a half further. Will fix that also.
Just messing around today.
Was really amazed it would climb up on the culvert without even slipping a tire.
With sway bars on your jeep would literally roll over trying this. Flex does help there is no doubt.
Here are my 10in bilstiens maxed out on the front. One side is bottomed, the other is extended all the way. I really need 14 in shocks and My control arm angle straightened out. So I will be working on it.
On the rear my 9 in shocks are max extended. I have inner fender tire rubbing issues that I loose 2in of travel. Which is the distance that my bumps are not touching. So with 1/2in spacers for the wheels and 1.5in blocks, as well as relocating the shocks I could gain it all back easily.
Plus my track bar is holding the left front from dropping an inch and a half further. Will fix that also.
Just messing around today.
Was really amazed it would climb up on the culvert without even slipping a tire.
With sway bars on your jeep would literally roll over trying this. Flex does help there is no doubt.
Last edited by holycaveman; Nov 21, 2012 at 04:30 PM.
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
Originally Posted by holycaveman
You guys that run 10in shocks are about a foot wider than me. that is a huge difference as far as flex goes. When you are narrow you have to flex a lot more to equal the same.
Here are my 10in bilstiens maxed out on the front. One side is bottomed, the other is extended all the way. I really need 14 in shocks and My control arm angle straightened out. So I will be working on it.
On the rear my 9 in shocks are max extended. I have inner fender tire rubbing issues that I loose 2in of travel. Which is the distance that my bumps are not touching. So with 1/2in spacers for the wheels and 1.5in blocks, as well as relocating the shocks I could gain it all back easily.
Plus my track bar is holding the left front from dropping an inch and a half further. Will fix that also.
Just messing around today.
Was really amazed it would climb up on the culvert without even slipping a tire.
With sway bars on your jeep would literally roll over trying this. Flex does help there is no doubt.
Here are my 10in bilstiens maxed out on the front. One side is bottomed, the other is extended all the way. I really need 14 in shocks and My control arm angle straightened out. So I will be working on it.
On the rear my 9 in shocks are max extended. I have inner fender tire rubbing issues that I loose 2in of travel. Which is the distance that my bumps are not touching. So with 1/2in spacers for the wheels and 1.5in blocks, as well as relocating the shocks I could gain it all back easily.
Plus my track bar is holding the left front from dropping an inch and a half further. Will fix that also.
Just messing around today.
Was really amazed it would climb up on the culvert without even slipping a tire.
With sway bars on your jeep would literally roll over trying this. Flex does help there is no doubt.
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
measuring a little high there buddy, the bottom of your tire is a little below the lift arms.