Roof mounted light bar
Junior Member
Joined: Oct 2010
Posts: 84
Likes: 1
From: Southeast MI
Year: 98
Model: Cherokee
Engine: 4.0L
Ive heard that too but have yet to have any issues.. i have locking bolts holding them there.. also I got the mount with the rubber strip which i think might hold them still.. although your correct the bar is bent but does not really effect the lights.. I will let everyone know the update on them later.. ive been driving all winter with them on there and no problems so far.. its been 6 months since i put them up and no issues..
Seasoned Member
Joined: Oct 2010
Posts: 467
Likes: 0
From: Crystal Lake, IL
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Wanted to update too, ive been using a ladder bar from the junkyard as a lightbar for over a year now and it works great. only cost me 10$ and i wire wheeled it and bedlined, also trimmed down the really tall ends so it looks sleek
Last edited by gms0623; Jul 14, 2012 at 01:08 AM.
Senior Member
Joined: Nov 2010
Posts: 976
Likes: 5
From: Cloquet, MN
Year: 2000 Ltd.
Model: Cherokee
Engine: 4.0L I6
CF Veteran
Joined: Oct 2010
Posts: 2,150
Likes: 12
From: Ontario, Canada
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
I drilled thru the stock rack crossover, and mounted Blazer brand lights, used stainless fasteners, run heavy wires for your power and your grounds, power your lights thru relays, not thru your switch. When adding the rack a little bit of limb protection bars added. Workin on a new light bar from my old Sylvania Silverstar headlights, high beams still work. I fabbed the rack also from 304SS.
Seasoned Member
Joined: Oct 2010
Posts: 467
Likes: 0
From: Crystal Lake, IL
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Senior Member
Joined: May 2011
Posts: 609
Likes: 2
From: Flagstaff, Arizona
Year: 1998
Model: Cherokee
Engine: 4.0L I6
I got mine from KevinsOffroad.com. it clamps onto the stock roof rails. Its on there! For about 100 bucks it was a great value, great customer service too
Junior Member
Joined: Apr 2015
Posts: 70
Likes: 0
From: Montana
Year: 2001
Model: Cherokee
Engine: 4.0 i6
Anyone know the size of light bar that fits across the top? I'm too lazy to go measure it right now and was hoping someone would know off the top of their head. I'm thinking a 50" would do it but I'm not sure
Junior Member
Joined: Mar 2016
Posts: 31
Likes: 0
I went cheap on mine....I was just thinking that for me I wheel very little at night and I can't always drive with it on so I couldn't find 500 -800 on a rigid industry light...eBay cheapie 79.99 with wiring harness . One pic is just with low beams and fog lights other is with the light bar on
