rebuild after roolover
#1
Junior Member
Thread Starter
Join Date: Apr 2009
Location: Corona Da. Tucson
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
rebuild after roolover
I have 1997 xj sport iwth bad engine and tnssfer case wating for me o swap my engine and transfer case out of 93 and oher usable parts from my 93 over to it. but i need A 4.5 lift leaf spring to replace broken one on 93 and two shoCks which were bent in rollover of 93. ALSO 93 IS Standard shaft and 97 IS AUTO. I want o keep auto. need o find out what I need to do to accomplish this..
#3
Senior Member
Join Date: Jun 2012
Location: PA
Posts: 524
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0L I6 Power Tech Engine
so you currently have auto, other engine TO be swapped is a standard? Ok well check up on the transfer cases, i think there is a difference in the splines although if you have a 231 i think it would work.
More Info and less amount of times i say i think
also just swap bel housings from your current motor and transmission to the new motor
More Info and less amount of times i say i think
also just swap bel housings from your current motor and transmission to the new motor
#4
::Regional Moderator::
Join Date: Jul 2011
Location: Over here...
Posts: 2,912
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
For the case, you would need to swap the input gear and planetary set from the '97 case into the '93. If the pilot bearing or bushing is pressed into the back of the crank, you'll need to make sure it's removed. You'll also have to swap the flex plate over from the '97.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
05-05-2024 12:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)