Problem to buy headers
Thread Starter
Newbie
Joined: Mar 2017
Posts: 1
Likes: 0
Model: Cherokee
Problem to buy headers
Hello i have a jeep cherokee form 1990, and i want to know if the headers of 1990 are compatible with the 1991 headers, cuz i searched this ones
http://www.ebay.com/itm/1991-1999-Je...item2caa781813
And ebay says me that no are compatible with 1990 engine, anyone knows if they are compatible, THANKS A LOT
http://www.ebay.com/itm/1991-1999-Je...item2caa781813
And ebay says me that no are compatible with 1990 engine, anyone knows if they are compatible, THANKS A LOT
CF Veteran
Joined: Jun 2011
Posts: 8,014
Likes: 17
From: Louisville,KY
Model: Cherokee
Not sure if it will work,And one is a header its only headers if you have a pair.And the biggest tip i can give you don't buy a cheapo one they always warp and crack save up and buy a good brand name one.And if your stock manifold is cracked the motor mounts being bad can cause that.
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,579
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
they are different but can be used with modifications.
HO exhaust manifold on Renix
As far as exhaust, you can use the Renix exhaust manifold and be fine.
If you want to use the HO exhaust manifold, you must go with an HO headpipe and screw your O2 sensor into that headpipe. Standard Renix harness is plenty long to do so.
A bung can be welded into the HO manifold to accept the EGR tube also.
HO exhaust manifold on Renix
As far as exhaust, you can use the Renix exhaust manifold and be fine.
If you want to use the HO exhaust manifold, you must go with an HO headpipe and screw your O2 sensor into that headpipe. Standard Renix harness is plenty long to do so.
A bung can be welded into the HO manifold to accept the EGR tube also.
