Pre-fabbed roll cage
CF Veteran
Joined: Mar 2010
Posts: 6,685
Likes: 6
From: Jacksonville, FL
Year: 92
Model: Cherokee
Engine: 4.0
Consider your application for any rollbar kit.
For most wheelers a highspeed rollover isn't the primary concern, it's a relatively low-speed roll/flop.
Keep in mind that the cage only needs to protect you once, it's not a "Re-Useable" product.
The kit in the OP has been around quite a while and I know a lot of local guys that have purchased and installed it. It is a great entry level interior kit that can be added to to suit your individual needs.
If you're building a JeepSpeed rig or comp. rig.....this ain't the kit for you.
For most wheelers a highspeed rollover isn't the primary concern, it's a relatively low-speed roll/flop.
Keep in mind that the cage only needs to protect you once, it's not a "Re-Useable" product.
The kit in the OP has been around quite a while and I know a lot of local guys that have purchased and installed it. It is a great entry level interior kit that can be added to to suit your individual needs.
If you're building a JeepSpeed rig or comp. rig.....this ain't the kit for you.
Member
Joined: Dec 2011
Posts: 149
Likes: 1
From: Menifee, CA
Year: 1989
Model: Cherokee
Engine: 4.0
they still sell it, from the home page click in jeepspeed products then cages and it'll come up
http://barnettperformance.net/index....&products_id=7
http://barnettperformance.net/index....&products_id=7
CF Veteran
Joined: Apr 2008
Posts: 13,952
Likes: 17
Model: Cherokee
Senior Member
Joined: Oct 2011
Posts: 823
Likes: 0
From: Raleigh,NC
Year: 1992
Model: Cherokee
Engine: 4.0L HO
I have this cage in my xj. I had them build mine out of DOM and they sent me the feet anyways. All of the bends and lengths were pretty accurate... Good starter kit to build off of for the money imo.
CF Veteran
Joined: Mar 2012
Posts: 1,369
Likes: 0
From: Richmond, VA
Model: Cherokee
Thread Starter
Member
Joined: Oct 2010
Posts: 176
Likes: 0
Model: Cherokee
Senior Member
Joined: Oct 2011
Posts: 823
Likes: 0
From: Raleigh,NC
Year: 1992
Model: Cherokee
Engine: 4.0L HO
It was about a weekend job overall with all the misc. stuff like interior removal/installation, prep work, etc. I believe I had the cage tacked then final welded in pretty quickly...don't remember exactly.
I went ahead and tied it into the uni frame also by sandwiching the floor with 2 cage feet on each side of the floor and welding a piece of tube from the uni frame to the bottom side foot.
I went ahead and tied it into the uni frame also by sandwiching the floor with 2 cage feet on each side of the floor and welding a piece of tube from the uni frame to the bottom side foot.
CF Veteran
Joined: Mar 2012
Posts: 1,369
Likes: 0
From: Richmond, VA
Model: Cherokee
Hi ____, 11-2587 will fit a XJ Cherokee. It has to be welded together. The front subframe supports will get welded to the roll cage. We have no installed pictures on the webbsite. We are trying to get some pictures on there. When you are ready to order give me a call. Anything else we can help you with let me know. Thanks!!!!!!!!!!!!
RANDY KRAUSE
S&W RACE CARS SALES
610-948-7303 X115
rkrause@swracecars.com
I know they get welded to the cage, but I wanted to know where they get welded to the unibody. I want to see pictures, but given the price they have for DOM it seems like a much better deal and beefier cage than the DandC cage. Curious what they charge for theirs in DOM since they don't list the price. Plus it's 10 point vs 6 point.
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
I emailed them a few questions for clarification last night, got a reply this afternoon. Followed up with a few more, will post results later.
Hi ____, 11-2587 will fit a XJ Cherokee. It has to be welded together. The front subframe supports will get welded to the roll cage. We have no installed pictures on the webbsite. We are trying to get some pictures on there. When you are ready to order give me a call. Anything else we can help you with let me know. Thanks!!!!!!!!!!!!
RANDY KRAUSE
S&W RACE CARS SALES
610-948-7303 X115
rkrause@swracecars.com
I know they get welded to the cage, but I wanted to know where they get welded to the unibody. I want to see pictures, but given the price they have for DOM it seems like a much better deal and beefier cage than the DandC cage. Curious what they charge for theirs in DOM since they don't list the price. Plus it's 10 point vs 6 point.
Hi ____, 11-2587 will fit a XJ Cherokee. It has to be welded together. The front subframe supports will get welded to the roll cage. We have no installed pictures on the webbsite. We are trying to get some pictures on there. When you are ready to order give me a call. Anything else we can help you with let me know. Thanks!!!!!!!!!!!!
RANDY KRAUSE
S&W RACE CARS SALES
610-948-7303 X115
rkrause@swracecars.com
I know they get welded to the cage, but I wanted to know where they get welded to the unibody. I want to see pictures, but given the price they have for DOM it seems like a much better deal and beefier cage than the DandC cage. Curious what they charge for theirs in DOM since they don't list the price. Plus it's 10 point vs 6 point.
Still a dang good price. Someone also mentioned it could be made better, even without a tube bender. Even more appealing.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)