PIC REQUEST: Raked XJs
Thread Starter
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I thought there was a forum for these but I don't see one on my phone. Please move this if I'm wrong.
Anyway, I'm looking for pics of Cherokees with a rake (rear end higher than front). Please specify the height difference between front and rear, and how it compares to stock. Thanks
Anyway, I'm looking for pics of Cherokees with a rake (rear end higher than front). Please specify the height difference between front and rear, and how it compares to stock. Thanks
Senior Member
Joined: Jul 2011
Posts: 908
Likes: 1
From: SIERRA VISTA AZ
Year: 1992
Model: Cherokee
Engine: 4.0L 6 CYL
The only time i have seen one or mine has been that way was when i removed everything out to do some interior work(36 in spare, tools, extra parts,fluids) and the rest of the stuff i carry. Then it sits about 1.5 to 2 in higher. other than that its not the norm.
CF Veteran
Joined: Sep 2010
Posts: 1,024
Likes: 0
From: Coos Bay, Or
Year: 1990
Model: Cherokee
Engine: 4.0
Mine is kind of racked I have about 2 1/2 inchs in front and 3 in the rear. I really don't see any benefit too it but then again mine isn't an extreme difference in front or rear and it really wasn't what i was going for when I lifted it. I have rancho parts up front and pro comp for leafs in back.
Thread Starter
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I want to do a bastard pack, and I was wondering what it would look like if it doesn't come out as planned on the first try. I know some Wrangler guys rake 1" ±.5" to keep downforce on their hood at highway speed. Thought there might be some XJs with a similar look (intentional or not).
Thread Starter
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Originally Posted by jcwclm
I haven't measured for sure yet but I'm guessing my rear has about an inch to inch and a half on my front.
Trending Topics
Thread Starter
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Thanks guys.
I think you have it backward lol
Originally Posted by GreenXJ95
Hmm I think my front was raked lol
CF Veteran
Joined: Jun 2011
Posts: 1,845
Likes: 3
From: S.E. Tx
Year: 1992
Model: Cherokee
Engine: 4.0 I6 firepower ignition, cat-back w/ magnaflow muffler, poweraid tb spacer, optima blue top
I have a r.e. 4.5" and the rear never seemed to settle, so it has a bit of rake. I estimate it at 1" - 1.5". Its kinda hard to tell with my trimmed front fenders, but if you look down the lower body line and the tops of the tires you can tell.
Thread Starter
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Great looking Jeeps! I thought the rake would look terrible but im not even noticing it unless I really look.
On a side note, im at a diner right now. The front half of the red Jeep is brown, and I couldn't stop myself from parking inches away from the chromed up black H2 in the lot
On a side note, im at a diner right now. The front half of the red Jeep is brown, and I couldn't stop myself from parking inches away from the chromed up black H2 in the lot
Thread Starter
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Just measured. 31" from ground on the front, 27.5" back. Just a spare tire and a gas tank skid in the back. I need to do something about this lol


