i just found a good wheel/tire deal where the wheels have 3.75" backspacing. i want my wheels to visibly stick out. please post a pic of your jeep and how much backspacing you have so i have an idea of what looks like what...

thanks, jon

 

3.75" backspacing and 33"s. The rears stick out every bit of 4", fronts a hair over 6". Tube fenders are in my future plans.





and an older pic

 

damn that sticks out alot with 3.75 BS i like that.. good looking truck, thanks

 

Thanks

 

any issues with the hub bearings with that wide stance? iv heard the bearings tend to get to stressed? whats your experinec

 

This 4" backspacing

 

 

do u encounter any issues with this backspacing of 3.75? people have said it wears out the bearings in a rapid state. you have any thoughts

 

Well, my jeep has 188,000 miles on it. As far as I know it still has the stock wheel bearing and ball joints. I did notice that my tires are wearing funny in the front, but that is only because my old tires were already worn pretty well, and did not show what was wrong.

So no, I haven't noticed any increase in wear on my stuff.( but I only have about 2,000 miles with these wheels/tires) I don't really want to replace anythingon my axles, because I plan on swapping in a D30 from a 1995+ Cherokee with WJ brakes, and a Ford8.8 in the rear for it's discs and strength.

 

I do not know my back spacing. Mine are just 10" craigers. I do not have any issuse. I have been driving and beating it off road for almost a year and no problems. It is also an 89 so its older too.

 

anybody else have any pictues??? i'm torn between 4" and 3.75"???

 

4" back spacing on 31's. Stock flares still on the jeep.

 

wat kind of tires are those

 

4in bs

 

Kumho Road Venture MT KL71's. If you look over to the left under our avatars where mine says 1997 Cherokee and click the little down arrows, alot of us have our jeep information there.