par pin elimantors for the back?

Reply Subscribe

Thread Tools

Search this Thread

Jun 20, 2014 | 10:29 AM

clockwise

Thread Starter

Senior Member

Joined: Aug 2009

Posts: 674

Likes: 0

From: McCall Idaho!

Year: 97

Model: Grand Cherokee

Engine: 5.2

par pin elimantors for the back?

What the title says i have some for the front curious if anyone makes them for the back or what do you guys do when you brake the bolts besides tapping and driling?

Jun 20, 2014 | 10:50 AM

XJwonders

CF Veteran

Joined: Jan 2013

Posts: 19,219

Likes: 45

From: west chester, pa

Year: 1999

Engine: 4.0

Some people use the old rear sway bar mounts to make rear BPE's

Jun 20, 2014 | 10:56 AM

EZEARL

CF Veteran

Joined: Aug 2009

Posts: 5,676

Likes: 301

From: WV

Year: '96

Model: Cherokee

http://www.lunghd.com/Tech_Articles/.../Rear_BPEs.htm

Jun 20, 2014 | 11:09 AM

no rdplz

CF Veteran

Joined: Jan 2010

Posts: 5,482

Likes: 25

From: Virginia Beach by way of Michigan

Quote:

Originally Posted by XJwonders

Some people use the old rear sway bar mounts to make rear BPE's

This. Or if you really want to spend the money quadretec has the teraflex ones.

Jun 20, 2014 | 04:57 PM

dmill89

Senior Member

Joined: Nov 2012

Posts: 918

Likes: 6

From: Harrisburg, Pennsylvania

Year: 1995

Model: Cherokee

Engine: 4.0L HO

Quote:

Originally Posted by clockwise

what do you guys do when you brake the bolts besides tapping and driling?

Knock out the weld-nuts with an air-hammer and put new hardware in. Either fish in bolts from the top with wire or tape the nut to a wrench (just enough to hold it) and thread the bolts in from the bottom while holding the nut in place with the wrench. Either way use either SAE Grade-8 or Metric Class-10.9 hardware.

https://www.cherokeeforum.com/f2/bro...utting-111475/

Last edited by dmill89; Jun 20, 2014 at 05:02 PM.