New "you know you drive an xj when"
CF Veteran
Joined: May 2011
Posts: 2,516
Likes: 4
From: va
Year: 1996
Model: Cherokee
Engine: i-6 4.0
Originally Posted by 94XjSport94
He's saying like after reading all these posts about things that happen while you drive an XJ he says his XJ left the driveway without him or whatever meaning he doesnt have little things like a lot of the posts... but hes stock lol
No, I don't lick fish.
Joined: Mar 2011
Posts: 11,169
Likes: 26
From: Northern Kentucky
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Got her stock with a seriously f'ed up front end. Well not that bad, bumper and crossmember caved in.
5.5 iro long arms with full packs, relocation brackets. Bpe's front and rear. No tc drop, or sye. No need never a bad vibe. 35" Baja claws on awesome 70's mags
Um....iron man Andy motor mounts, xjfiles bored tb, 2002 grand booster, 99 intake, header. Full 2.5 from header,through flowmaster 40 series. 3 row alum. Rad, flowkooler water pump. big plug wires, and all power and ground wires. Accel coil.
Bad *** Sony head unit, soundstream 6x9's, and 5 and a halfs.
Stock axles, 31 spline in the 8.25.
Jcr front bumper. 7 1/2 shackles.
Bedlined interior.
I doubt thats it. But thats all i.can think of right now
5.5 iro long arms with full packs, relocation brackets. Bpe's front and rear. No tc drop, or sye. No need never a bad vibe. 35" Baja claws on awesome 70's mags
Um....iron man Andy motor mounts, xjfiles bored tb, 2002 grand booster, 99 intake, header. Full 2.5 from header,through flowmaster 40 series. 3 row alum. Rad, flowkooler water pump. big plug wires, and all power and ground wires. Accel coil.
Bad *** Sony head unit, soundstream 6x9's, and 5 and a halfs.
Stock axles, 31 spline in the 8.25.
Jcr front bumper. 7 1/2 shackles.
Bedlined interior.
I doubt thats it. But thats all i.can think of right now
Junior Member
Joined: Apr 2012
Posts: 45
Likes: 0
From: kennewick washington
Year: 1989
Model: Cherokee
Engine: 4.0
Ykydaxj wen u cant sleep at night because your thinking of different ways to cut your fenders to fit 33s on a 3 inch lift until you get your new 41/2 inch lift n september
CF Veteran
Joined: Nov 2011
Posts: 1,469
Likes: 0
From: State College, PA
Year: 1995
Model: Cherokee
Engine: 4.0 I6
Originally Posted by 89 country boy
Ykydaxj wen u cant sleep at night because your thinking of different ways to cut your fenders to fit 33s on a 3 inch lift until you get your new 41/2 inch lift n september
Junior Member
Joined: Apr 2012
Posts: 45
Likes: 0
From: kennewick washington
Year: 1989
Model: Cherokee
Engine: 4.0
Originally Posted by bighouts5591
You're going to have to do a stupid amount of trimming to fit 33s on a 3" lift, and add a ton of bumpstop. Why not just wait until you get your bigger lift and then only trim what you need to instead of destroying your fenders?
Junior Member
Joined: Dec 2011
Posts: 52
Likes: 1
From: NOVA
Year: Pinto Farm
Now if you were to put 33's on stock ride height, then you'll prolly have a "stupid" amount to trim lol
CF Veteran
Joined: Oct 2011
Posts: 4,000
Likes: 0
From: West Palm Beach
Year: 1996
Model: Cherokee
Engine: 4.0 h.o. with 703's and a KN&N drop in filter
Originally Posted by kleiner
I wouldn't say a stupid amount of trimming. I just did basic trimming to fit 35's on 4.5".
Now if you were to put 33's on stock ride height, then you'll prolly have a "stupid" amount to trim lol
Senior Member
Joined: Jan 2012
Posts: 576
Likes: 0
From: High Desert AV
Year: 88
Model: Cherokee
Engine: inline 6 4.0 liter renix
Originally Posted by REEDracing94
Im running 33s and 4.5 with zero trimming
Ykydaxjw you have no problem cutting into your fenders
Ykydaxjw you have no problem cutting into your fenders
